HP Nc6220 HP Compaq nc6220 and nc6230 Notebook PC - Maintenance and Service Gu - Page 137
module away from the socket at a 45-degree angle
View all HP Nc6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Removal and Replacement Procedures 4. Disconnect the auxiliary and main antenna cables 1 from the Mini PCI communications module. ✎ Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications module before disconnecting the cables. 5. Spread the two retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications module. (The side of the Mini PCI communications module opposite the socket rises away from the computer.) 6. Remove the Mini PCI communications module by pulling the module away from the socket at a 45-degree angle 3. ✎ Mini PCI communications modules are designed with a notch 4 to prevent incorrect installation into the Mini PCI socket. Removing a Mini PCI Communications Module Reverse the above procedure to install a Mini PCI communications module. Maintenance and Service Guide 6-35