HP P2000 HP P2000 G3 MSA System CLI Reference Guide
HP P2000 Manual
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP P2000 manual content summary:
- HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 1
HP P2000 G3 MSA System CLI Reference Guide Part number: 500912-006 First edition: May 2011 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 2
statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Acknowledgements Microsoft and Windows are U.S. registered trademarks of Microsoft - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 3
40 convert master-to-std 41 convert std-to-master 42 create chap-record 43 create host 44 create master-volume 45 create remote-system 47 create replication-set 48 create schedule 52 create snap-pool 54 create snapshots 55 create task 56 HP P2000 G3 MSA System CLI Reference Guide 3 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 4
all-statistics 105 reset controller-statistics 106 reset disk-error-statistics 107 reset disk-statistics 108 reset host-link 109 reset host-port-statistics 110 reset snapshot 111 reset vdisk-statistics 112 reset volume-statistics 113 restart 114 restore defaults 115 resume replication - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 5
186 show disk-statistics 189 show email-parameters 190 show enclosures 191 show enclosure-status 192 show events 194 show expander-status 196 show frus 199 show host-maps 201 show host-parameters 203 show host-port-statistics 206 show hosts 207 show inquiry 208 HP P2000 G3 MSA System CLI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 6
show iscsi-parameters 209 show job-parameters 210 show license 211 show master-volumes 213 show network-parameters 215 show ntp-status 217 show ports 218 show power-supplies 220 show priorities 221 show protocols 222 show redundancy-mode 223 show refresh-counters 224 show remote-systems - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 7
-port 385 sas-status-controller-a 386 schedules 389 security-communications-protocols 390 sensors 392 ses 393 shutdown-status 395 snap-pools 396 snapshots 397 snapshot-with-retention-tasks 400 snap-tasks 401 snmp-parameters 402 status 403 system 404 HP P2000 G3 MSA System CLI Reference - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 8
cache 413 users 414 vdisk-statistics 416 versions 417 virtual-disks 418 volume-copy-status 424 volume-copy-tasks 425 volume-names 426 volumes 427 volume-statistics 431 volume-view 433 volume-view-mappings 434 A Settings changed by restore defaults 435 Glossary 437 Index 441 8 Contents - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 9
363 49 redundancy properties 366 50 refresh-counters properties 368 51 remote-addresses properties 370 52 remote-links properties 371 53 remote-system properties 372 54 replicate-volume-tasks properties 374 55 replication-image properties 375 HP P2000 G3 MSA System CLI Reference Guide 9 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 10
376 57 replication-set properties 378 58 replication-volume properties 379 59 replication-volume-summary properties 383 60 reset-snapshot-tasks properties 384 61 sas-port properties 385 62 sas-status-controller-a properties 386 63 schedules properties 389 64 security-communications - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 11
System Installation Instructions • HP P2000 G3 MSA System Cable Configuration Guide • HP P2000 G3 MSA System FC User Guide • HP P2000 G3 MSA System FC/iSCSI User Guide • HP P2000 G3 MSA System SAS User Guide • HP P2000 G3 iSCSI MSA System iSCSI User Guide • HP P2000 G3 MSA System SMU Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 12
the command line CAUTION: Indicates that failure to follow directions could result in damage to equipment or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. HP technical support Telephone - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 13
/whitepapers • http://www.hp.com/go/p2000 Documentation feedback HP welcomes your feedback. To make comments and suggestions about product documentation, please send a message to [email protected]. All submissions become the property of HP. HP P2000 G3 MSA System CLI Reference Guide 13 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 14
14 About this guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 15
This chapter introduces the HP P2000 G3 MSA System command-line interface (CLI). Accessing the CLI The CLI software embedded in the controller modules enables you to manage and monitor storage-system operation. You can access the CLI in two ways: • By using HTTP, HTTPS, Telnet, an SSH application - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 16
to access the CLI The following example shows how to construct a Perl script to communicate with the CLI via Telnet. cLogin is called at the start of the script to log a user into the CLI. The script uses the command-line parameters specified as the IP address, username, and password. After the user - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 17
shows how to construct a Perl script to communicate with the XML API via HTTP. use LWP::UserAgent; use Digest::MD5 qw(md5_hex); use XML::LibXML; # generate MD5 hash using default username/password "Property = " . $name . "\n"; if( $name eq 'response' ) { HP P2000 G3 MSA System CLI Reference Guide 17 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 18
DTD, go to http://hp.com/go/p2000. The output of each CLI command is composed of valid XML data until the CLI prompt (typically #) is RESPONSE element per issued command. OBJECT In general, an OBJECT element describes a storage-system component such as a disk or a volume. An object has - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 19
to the output. The output of show commands is intended for monitoring or obtaining the current configuration. Other commands provide configuration data and display one or more false" sort="datetime" display-name="Time">1281439949 HP P2000 G3 MSA System CLI Reference Guide 19 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 20
. Brief mode can be enabled or disabled by using the set cli-parameters command. In the following example, which uses brief mode, embedded objects contain media-specific detail for ports: # show ports - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 21
of disks. Example: 1.4-7 • A comma-separated list of individual disks, ranges, or both (with no spaces). Example: 1.4,1.6-9 • A RAID 10 or 50 vdisk, with disks in sub-vdisks separated by colons (with no spaces). RAID-50 example: 1.1-3:1.4-6:1.7,1.10-11 HP P2000 G3 MSA System CLI Reference Guide 21 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 22
, and does not change for the life of the volume. • A list of volume names or serial numbers separated by commas (with no spaces). Not all commands support lists. List example: vd1_v1,"Vol #1" Ports Controller host ports are specified by controller ID and port number, and are not case sensitive - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 23
3 bytes. Operating systems usually show volume size in base 2. Disk drives usually show size in base 10. Memory (RAM and ROM) size is always shown in base 2. In the CLI, the base for Dutch, French, German, Italian, Spanish Comma (,) 146,81 GB 3,0 Gb/s HP P2000 G3 MSA System CLI Reference Guide 23 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 24
stability but not data integrity. Evaluate the problem and correct it if necessary. • Informational. A configuration or state change occurred, or a problem occurred that the system corrected. No action is required. For information about viewing events, see the show events command. 24 Using the CLI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 25
ports show unwritable-cache show volume-maps show volume-names show volumes unmap volume expand snap-pool reset snapshot rollback master-volume set priorities set snap-pool-policy set snap-pool-threshold show master-volumes show priorities show snap-pools show snapshots HP P2000 G3 MSA System CLI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 26
show snmp-parameters test show controller-date show controllers show disk-parameters show enclosures show enclosure-status show expander-status show frus show host-parameters show inquiry show iscsi-parameters show job-parameters show license show network-parameters show ntp-status show ports show - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 27
host expand master-volume expand volume reset host-channel-link reset host-link set drive-parameters set disk-parameters set global-spare set spares set host-port-interconnects None set host-wwn-name set host-name set iscsi-host set host-name HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 28
channels show ports show drive-parameters show disk-parameters show host-port-interconnects None show host-wwn-names show hosts show iscsi-hosts show hosts show lun-maps show volume-maps show output-format show cli-parameters show port-wwn show ports 28 Categorical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 29
of fields shown in console format Example One or more examples of the command's usage in console format Basetypes References to descriptions of basetype properties shown in XML API format See also References to commands that are used with the command HP P2000 G3 MSA System CLI Reference Guide 29 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 30
replication operation on the specified replication volume. The current replication may be running or suspended. This command must be issued on the system that owns the secondary volume. Syntax abort replication [set replication-set] replication-volume Parameters set replication-set Optional. Name - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 31
vdisk vdisks Names or serial numbers of the vdisks to stop scrubbing. For vdisk syntax, see Command syntax on page 21. Example Abort scrubbing vdisk vd1: # abort scrub vdisk vd1 Info: Scrub was aborted on vdisk vd1. See also • scrub vdisk • show vdisks HP P2000 G3 MSA System CLI Reference Guide 31 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 32
numbers of the vdisks to stop verifying. For vdisk syntax, see Command syntax on page 21. Example Abort verifying vdisk vd1: # abort verify vdisk vd1 Info: Command completed successfully. (vd1) - The verify was aborted on vdisk vd1. See also • show vdisks • verify vdisk 32 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 33
syntax, see Command syntax on page 21. Example Abort creating destination volume vd1_copy: # abort volumecopy v1_copy Success: Command completed successfully. - The volume copy was aborted. See also • show volumecopy-status • show volumes • volumecopy HP P2000 G3 MSA System CLI Reference Guide 33 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 34
priority low|medium|high] [remote-system system] secondary-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs [set replication-set] replication-volume Parameters link-type FC|iSCSI Specifies the type of ports being used for the inter-system link: • FC: FC ports • iSCSI: iSCSI ports max-queue # Optional. Number of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 35
replication set that uses iSCSI links and whose primary volume is NewYork: # add replication-volume LosAngeles primary-volume NewYork link-type iSCSI secondary-address ip=10.134.69.5,10.134.69.6 See also • show replication-sets • show replication-volumes HP P2000 G3 MSA System CLI Reference Guide 35 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 36
data will differ between the host and disk. Unwritable cache is also called orphan data. You can clear unwritable cache data for a specified volume or for all volumes. Syntax clear cache [volume volume] Parameters volume volume Optional. Name or serial number of the volume whose cache data should be - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 37
How Used ... 1.1 ... LEFTOVR ... 1.2 ... VDISK ... ... Clear metadata from a leftover disk: # clear disk-metadata 1.1 Updating disk list... Info: Disk 1.1 metadata was cleared. Success: Command completed successfully. - Metadata was cleared. HP P2000 G3 MSA System CLI Reference Guide 37 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 38
clear metadata from a disk that is not leftover: # clear disk-metadata 1.2 Error: The specified disk is not a leftover disk. - Disk 1.2 metadata was NOT cleared. Error: The specified disk is not a leftover disk. (1.2) - Metadata was not cleared for one or more disks. 38 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 39
log to clear. If this parameter is omitted, both event logs are cleared. Example Clear the event log for controller A: # clear events a Info: Controller A event log was successfully cleared. Success: Command completed successfully. See also • show events HP P2000 G3 MSA System CLI Reference Guide 39 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 40
For use by or with direction from a service technician. Clears the counters and status for SAS expander lanes. Counters and status can be reset to a good state for all enclosures, or for a specific enclosure whose status is Error as shown by the show expander-status command. NOTE: If a rescan is in - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 41
a master volume having no snapshots to a standard volume: # convert master-to-std MV1 Success: Command completed successfully. - The conversion of a master volume to a standard volume completed. See also • delete all-snapshots • show master-volumes HP P2000 G3 MSA System CLI Reference Guide 41 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 42
on page 21. Example Convert standard volume V1 to a master volume and associate it with snap pool SP1: # convert std-to-master snap-pool SP1 V1 Success: Command completed successfully. - The conversion of a standard volume to a master volume completed. See also • show volumes 42 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 43
storage system's IQN, use the show ports command to view an iSCSI port Target ID Command completed successfully. - A CHAP record was created. See also • delete chap-records • set chap-record • show chap-records • show host-parameters • show iscsi-parameters HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 44
be assigned to a mapping. This is the default. • openvms: The host does not allow LUN 0 to be assigned to a mapping. • hp-ux: The host allows LUN 0 to be assigned to a mapping and uses Flat Space Addressing. Example Create an entry named Host1 for an FC host whose WWPN is 207000C0FF001122: # create - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 45
32767 to identify the volume to the host. name A name for the new volume. The name is case sensitive; cannot include a comma, double quote, or backslash; and can have a maximum of 20 bytes. A name that includes a space must be enclosed in double quotes. HP P2000 G3 MSA System CLI Reference Guide 45 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 46
create an associated 20-GB snap pool: # create master-volume vdisk VD1 size 50GB prepare-replication-volume reserve 20GB MV2 Success: Command completed successfully. (MV2) - The master volume was created. See also • show master-volumes • show snap-pools • show vdisks 46 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 47
remote system: # create remote-system username manage password !manage 10.122.1.21 Success: Command completed successfully. (10.122.1.21) - The remote system was created. See also • delete remote-system • remote • set remote-system • show remote-systems HP P2000 G3 MSA System CLI Reference Guide 47 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 48
yes; otherwise, enter no. Syntax create replication-set [link-type FC|iSCSI] [max-queue #] [noprompt] [nowait] [primary-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs] [priority low|medium|high] [remote-system system] [remote-vdisk vdisk] [remote-volume volume] [reserve size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 49
(gigabytes) If no unit is specified, the unit is 512-byte blocks. If this parameter is omitted, the size will be either 20% of the volume size or the minimum snap-pool size, whichever is larger. HP P2000 G3 MSA System CLI Reference Guide 49 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 50
specified; required if the MC cannot communicate and a replication-prepared volume is specified. Specifies host ports on the remote system by IP address, World Wide Node Name, or World Wide Port Name. An IP address value can include a port number; for example, 10.134.2.1:3260. Multiple values must - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 51
set link-type FC remote-volume Test-backup Test See also • add replication-volume • delete replication-set • remove replication-volume • replicate snapshot • show remote-systems • show replication-images • show replication-sets • show replication-volumes HP P2000 G3 MSA System CLI Reference Guide 51 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 52
tasks, a best practice is to schedule no more than three volumes to start replicating performance when scheduling a TakeSnapshot task that will run under heavy I/O conditions or on more than three volumes Command completed successfully. (Sched1) - The schedule was created. 52 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 53
00:01 only first weekday of month" task-name Task2 Sched2 Success: Command completed successfully. (Sched2) - The schedule was created. Try to create 'between' parameter. See also • show schedule-details • show schedules • show task-details • show tasks HP P2000 G3 MSA System CLI Reference Guide 53 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 54
use for snapshot data. A snap pool is an internal volume and cannot be mapped. Syntax create snap-pool vdisk vdisk |KiB|MiB|GiB|TiB] Sets the snap-pool size using the current base, as shown by the show cli-parameters command. The unit can be specified as follows: • If base 2 is in use: B (bytes), - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 55
of standard volume V1 and master volume V2: # create snapshots volumes V1,V2 V1snap,V2snap Info: Snap pool spV1 was created. Success: Command completed successfully. (V1snap,V2snap) - Snapshot(s) were created. See also • show snapshots • show volumes HP P2000 G3 MSA System CLI Reference Guide 55 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 56
is performed; leaving it mounted/presented/mapped can cause data corruption. You should create a scheduled job on the host to unmount/unpresent/unmap the snapshot prior to resetting it. Syntax To create a task to take a snapshot: create task type TakeSnapshot source-volume volume snapshot-prefix - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 57
Name or serial number of the destination vdisk for the volume copy. For vdisk syntax, see Command syntax on page 21. dest-prefix prefix A label to identify the volume copy created by this task. Copy names have the format prefix_c#, where # starts at 001. HP P2000 G3 MSA System CLI Reference Guide 57 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 58
. Create a task to disable or suspend spin-down for all disks: # create task type DisableDSD taskDSDsuspend Success: Command completed successfully. (taskDSDsuspend) - The task was created. See also • create schedule • set task • show task-details • show tasks • show volumes 58 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 59
, the command prompts you to enter and re-enter a value, which is displayed encrypted. precision # Optional. Sets the number of decimal places (1-10) for display of storage-space sizes. Default is 1. storage-size-base 2|10 Optional. Alias for base. HP P2000 G3 MSA System CLI Reference Guide 59 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 60
. NOTE: The user name admin is reserved for internal use. Example Create user John who will view system information using base 2 in SMU: # create user base 2 interfaces wbi level monitor John Enter new password: **** Re-enter new password: **** Success: Command completed successfully. (John) - The - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 61
than offline. Online initialization is fault-tolerant. This option is the default. • offline: You must wait for the vdisk initialization process to finish before using the vdisk; however, offline takes less time to complete initializing than online. HP P2000 G3 MSA System CLI Reference Guide 61 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 62
two single-ported disks: # create vdisk level raid0 disks 1.1-2 TempData Info: One or more disks are Single Ported - data path will not be fault tolerant. Success: Command completed successfully. (TempData) - The vdisk was created. See also • set vdisk • show disks • show vdisks 62 Alphabetical - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 63
|TiB] Optional. Size of the snap pool to create in the vdisk. If this parameter is omitted, the size will be either 20% of the volume size or the minimum snap-pool size, whichever is larger. Use either this parameter or the snap-pool parameter. HP P2000 G3 MSA System CLI Reference Guide 63 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 64
vdisk VD1, and map it to ports A1 and B1 using LUN 5: # create volume vdisk VD1 size 20GB ports a1,b1 lun 5 V1 Info: The volume(s) were created. (V1) Success: Command completed successfully. (V1) - The volume(s) were mapped. See also • set volume • show vdisks • show volumes 64 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 65
create volume-copy See volumecopy. HP P2000 G3 MSA System CLI Reference Guide 65 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 66
-only (ro), or no-access. If no-access is specified, the volume is not mapped. The default is read-write. ports ports Optional. The controller ports through which hosts can access the volumes using LUNs specified by the baselun parameter. For port syntax, see Command syntax on page 21. If not all - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 67
A1 6 read-only all other hosts Standard ... Volume View [Serial Number (SN) Name (vd1_v009) ] Mapping: Ports LUN Access Host-Port-Identifier Nickname Profile A1 14 read-only all other hosts Standard Success: Command completed successfully. HP P2000 G3 MSA System CLI Reference Guide 67 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 68
See also • map volume • set volume • show vdisks • show volume-maps • show volumes • unmap volume 68 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 69
Delete all master volumes associated with snap pool SP1: # delete all-master-volumes snap-pool SP1 Success: Command completed successfully. (SP1) - All master volumes were deleted. See also • delete all-snapshots • show master-volumes • show snap-pools HP P2000 G3 MSA System CLI Reference Guide 69 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 70
master volume MV2: # delete all-snapshots volume MV2 delete-type all-replication-snapshots Info: This may take a few minutes if the system is under heavy load... Success: Command completed successfully. (MV2) - All snapshots were deleted. See also • show snapshots • show volumes 70 Alphabetical - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 71
Description For iSCSI, deletes a specified CHAP record or all CHAP records. This command is permitted Command completed successfully. - All CHAP records were deleted. See also • create chap-record • set chap-record • show chap-records • show host-parameters HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 72
disk syntax, see Command syntax on page 21. Example Delete two global spares: # delete global-spare disks 0.5,1.5 Info: Command completed successfully. (0.5) - Global spare disk 0.5 was deleted. Info: Command completed successfully. (1.5) - Global spare disk 1.5 was deleted. See also • show disks - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 73
: # delete host 500605B000320BB4 Error: The command had an invalid value. (257000c0ffd8b6cb) - Host 257000c0ffd8b6cb was discovered, so it cannot be deleted. Error: The command had an invalid value. See also • set host-name • show host-maps • show hosts HP P2000 G3 MSA System CLI Reference Guide 73 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 74
of the master volume to delete. For volume syntax, see Command syntax on page 21. Example Delete master volume MV1: # delete master-volume MV1 Success: Command completed successfully. (MV1) - The master volume was deleted. See also • delete all-snapshots • show master-volumes 74 Alphabetical list - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 75
-port IP address of the remote system. Example Delete remote system System2: # delete remote-system System2 Success: Command deleted successfully. (System2) - The remote system was deleted. See also • create remote-system • remote • set remote-system • show remote-systems HP P2000 G3 MSA System CLI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 76
of the number of snapshots allowed by the system's license. This command must be run on the primary system. Syntax delete replication-set ID Parameters ID Name or serial number of either the replication set or its primary volume. Example Delete replication set RS1: # delete replication-set - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 77
delete schedule schedule Parameters schedule The schedule to delete. Example Delete schedule Sched1: # delete schedule Sched1 Success: Command completed successfully. (Sched1) - The schedule was deleted. See also • show schedule-details • show schedules HP P2000 G3 MSA System CLI Reference Guide 77 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 78
or serial number of the snap pool to delete. For volume syntax, see Command syntax on page 21. Example Delete snap pool SP1: # delete snap-pool SP1 Success: Command completed successfully. (SP1) - The snap-pool was deleted. See also • show master-volumes • show snap-pools 78 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 79
both. snapshots Names or serial numbers of the snapshots to delete. For volume syntax, see Command syntax on page 21. Example Delete snapshot SS1, which is being used Snapshot s3 was deleted. (s3) See also • delete snapshot-write-data • show snapshots HP P2000 G3 MSA System CLI Reference Guide 79 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 80
it was first taken. Syntax delete snapshot-write-data snapshot Parameters snapshot Name or serial number of the snapshot to delete modified data from. For volume syntax, see Command syntax on page 21. Example Delete only modified data from snapshot SS1: # delete snapshot-write-data SS1 Success - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 81
task The task to delete. Example Delete task Task1: # delete task Task1 Success: Command completed successfully. (Task1) - The task was deleted. See also • delete schedule • show schedule-details • show schedules • show task-details • show tasks HP P2000 G3 MSA System CLI Reference Guide 81 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 82
default user manage. Syntax delete user [noprompt] name Parameters noprompt Optional in console format; required for XML API format. Suppresses the confirmation prompt, which requires a yes or no response. Specifying this parameter allows the command Command completed successfully. Delete user Kim - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 83
: Stop the utility and allow the command to proceed. • no: Cancel the command. If this parameter is omitted, you must manually reply to the prompt. vdisks Names or VD3. Success: Command completed successfully. See also • show master-volumes • show vdisks HP P2000 G3 MSA System CLI Reference Guide 83 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 84
to delete the spares from. For disk syntax, see Command syntax on page 21. Example Delete spare disk 1.5 from vdisk VD1: # delete vdisk-spare disks 1.5 VD1 Info: Command completed successfully. (1.5) - Vdisk spare disk 1.5 was deleted. See also • show disks • show vdisks 84 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 85
to delete. For volume syntax, see Command syntax on page 21. Example Delete volumes V1 and V2: # delete volumes V1,V2 Info: Volume V1 was deleted. (V1) Info: Volume V2 was deleted. (V2) Success: Command completed successfully. See also • show volumes HP P2000 G3 MSA System CLI Reference Guide 85 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 86
manual intervention. A vdisk can remain quarantined indefinitely without risk of data loss. Examples of when quarantine might occur are: • At system power-up, a vdisk has fewer disks online than at the previous power-up. This may happen because a disk is slow to spin up, or because a drive enclosure - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 87
re-check its status: # show vdisks Name ... Stat VD1 ... QTDN ... (Quarantined with down disks dequarantine vdisk VD1 Success: Command completed successfully # show vdisks Name ... Stat VD1 ... FTDN ... (Fault tolerant, down) See also • show vdisks HP P2000 G3 MSA System CLI Reference Guide 87 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 88
are allowed to move other volumes along with secondary volumes and their snap pools, but be sure that you are doing so intentionally. NOTE: If you intend to move a vdisk's drive enclosure and you want to allow I/O to continue to the other enclosures, it is best if it is at the end of the chain of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 89
exit Description Log off and exit the CLI session. Syntax exit HP P2000 G3 MSA System CLI Reference Guide 89 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 90
of the snap pool to expand. For volume syntax, see Command syntax on page 21. Example Expand snap pool SP1 by 100 GB: # expand snap-pool size 100GB SP1 Success: Command completed successfully. - Expansion of volume SP1 was started. See also • show snap-pools • show vdisks 90 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 91
Best Practices white paper before starting a vdisk expansion. See the online help to access this white paper. Start to expand this vdisk? yes Success: Command completed successfully. - Expansion was started on vdisk VD1. See also • show disks • show vdisks HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 92
size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB] volume To expand to the maximum size: expand volume size max volume Parameters size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB] Specifies the size using the current base, as shown by the show cli-parameters command. The unit can be specified as follows: • If base - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 93
. Example Export local replication snapshot RepSnap1 to standard snapshot Snap1: # export snapshot name Snap1 RepSnap1 Success: Command completed successfully. (RepSnap1) - The snapshot has been exported. See also • show replication-sets • show snapshots HP P2000 G3 MSA System CLI Reference Guide 93 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 94
become its default mapping, which specifies the controller host ports and access level that all connected hosts have to the volume, and the LUN presented to all hosts to identify the volume. The default mapping's LUN is known as the volume's default LUN. The map volume command creates mappings - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 95
Volume View [Serial Number (SN) Name (v1) ] Mapping: Ports LUN Access Host-Port-Identifier Nickname Profile A1,B1 6 read-write 207000c0ff001121 Host1 Standard A1,B1 6 read-write 207000c0ff001122 Host2 Standard not-mapped all other hosts Standard HP P2000 G3 MSA System CLI Reference - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 96
Ports LUN Access Host-Port-Identifier Nickname Profile A1,B1 7 read-write 207000c0ff001121 Host1 Standard A1,B1 7 read-write 207000c0ff001122 Host2 Standard not-mapped all other hosts Standard Success: Command completed successfully. See also • show host-maps • show hosts • show volume - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 97
versions virtual-disks volume-copy-status volume-copy-tasks volume-names volumes volume-statistics volume-view volume-view-mappings Example Show all metadata for objects returned by the show disks command: # meta drives See also • set cli-parameters HP P2000 G3 MSA System CLI Reference Guide 97 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 98
packets and waits for replies. Syntax ping host-address [count] Parameters host-address The remote host's IP address in dotted decimal form. count Optional. The number of packets to send. The default is 4 packets. Use a small count because the command cannot be interrupted. Example Send two packets - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 99
volume rV1: # reattach replication-volume rV1 Success: Command completed successfully. - The replication volume reattach has been initiated. See also • detach replication-volume • show replication-sets • show replication-volumes • start vdisk • stop vdisk HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 100
remote system command Parameters system Name or network-port IP address of the remote system. command Any CLI command that is valid for the remote user's access level. Example Run the show vdisks command on remote system System2: # remote System2 show vdisks Name Size Free Own Pref RAID Disks - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 101
. Info: Command completed successfully. (rData) - Removed secondary volume rData. Success: Command completed successfully. (rData) - Remove Replication volume operation successfully completed. See also • show replication-sets • show replication-volumes HP P2000 G3 MSA System CLI Reference Guide 101 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 102
create and replicate a snapshot as a single task, use the replicate volume command. Syntax replicate snapshot [name replication-snapshot] [set replication-set] external- RepSnap1 Snap1 Success: Replication Initiated. See also • show replication-sets • show snapshots 102 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 103
replication sets, specify the set parameter. Example Replicate volume MV1 and name the replication snapshot RepSnap1: # replicate volume snapshot RepSnap1 MV1 Success: Replication Initiated. See also • show replication-sets • show replication-volumes HP P2000 G3 MSA System CLI Reference Guide 103 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 104
forces rediscovery of attached disks and enclosures. If both Storage Controllers are online this command also reassigns enclosure IDs based on controller A's enclosure cabling order. A manual rescan may be needed after system power-up to display enclosures in the proper order. A manual rescan is not - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 105
statistics Success: Command completed successfully. See also • reset controller-statistics • reset disk-error-statistics • reset disk-statistics • reset host-port-statistics • reset vdisk-statistics • reset volume-statistics • show controller-statistics HP P2000 G3 MSA System CLI Reference Guide 105 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 106
for both controllers: # reset controller-statistics Success: Command completed successfully. See also • reset all-statistics • reset disk-error-statistics • reset disk-statistics • reset host-port-statistics • reset vdisk-statistics • reset volume-statistics • show controller-statistics 106 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 107
1.1,2.1 Success: Command completed successfully. See also • reset all-statistics • reset controller-statistics • reset disk-statistics • reset host-port-statistics • reset vdisk-statistics • reset volume-statistics • show disk-statistics • show disks HP P2000 G3 MSA System CLI Reference Guide 107 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 108
for all disks: # reset disk-statistics Success: Command completed successfully. See also • reset all-statistics • reset controller-statistics • reset disk-error-statistics • reset host-port-statistics • reset vdisk-statistics • reset volume-statistics • show disk-statistics 108 Alphabetical - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 109
is not case sensitive. Do not mix controller IDs in a range. Example Reset the host link on port A1: # reset host-link ports A1 Success: Command completed successfully. - Reset Host Link(s) on port(s) a1 from current controller. See also • show ports HP P2000 G3 MSA System CLI Reference Guide 109 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 110
controller host ports: # reset host-port-statistics Success: Command completed successfully. See also • reset all-statistics • reset controller-statistics • reset disk-error-statistics • reset disk-statistics • reset vdisk-statistics • reset volume-statistics • show host-port-statistics • show ports - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 111
on page 21. Example Reset snapshot SS1: # reset snapshot SS1 You MUST unmount the snapshot from all hosts before resetting it. Ready to continue? yes Success: Command completed successfully. - The reset of a snapshot completed. See also • show snapshots HP P2000 G3 MSA System CLI Reference Guide 111 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 112
-statistics VD1,MyVdisk Success: Command completed successfully. See also • reset all-statistics • reset controller-statistics • reset disk-error-statistics • reset disk-statistics • reset host-port-statistics • reset volume-statistics • show vdisk-statistics • show vdisks 112 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 113
Success: Command completed successfully. See also • reset all-statistics • reset controller-statistics • reset disk-error-statistics • reset disk-statistics • reset host-port-statistics • reset vdisk-statistics • show volume-statistics • show volumes HP P2000 G3 MSA System CLI Reference Guide 113 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 114
. If the restart fails, the partner MC remains active with full ownership of operations and configuration information. CAUTION: If you restart both controller modules, you and users lose access to the system and its data until the restart is complete. Syntax restart sc|mc [a|b|both] [noprompt - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 115
parameters will take effect at the next controller reset. Logical devices may not be accessible until mappings are reconfigured. Are you sure? yes Success: Command completed successfully. - Device default configuration was restored. See also • restart HP P2000 G3 MSA System CLI Reference Guide 115 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 116
Description Resumes a suspended replication operation on the specified replication volume. This command must be issued on the system that owns the secondary volume. Syntax resume replication [set replication-set] replication-volume Parameters set replication-set Optional. Name or serial number of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 117
SS1 MV1 You MUST unmount the master volume and the snapshot from all hosts before starting a rollback operation. Ready to continue? yes Success: Command completed successfully. - Rollback was started. See also • show master-volumes • show snapshots HP P2000 G3 MSA System CLI Reference Guide 117 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 118
performed with this command is typically faster than a background scrub enabled with the set job-parameters command. Reference Guide. Syntax scrub vdisk vdisks Parameters vdisks Names or serial numbers of the vdisks to scrub. For vdisk syntax, see Command syntax on page 21. Example Scrub the disks - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 119
disk has enough capacity to replace the failed disk and is the same type (SAS or SATA). emp-poll-rate rate Optional. Sets the interval at which the storage system polls the EC (EMP) for status changes, from 5-3600 seconds. The default is 5 seconds. HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 120
content is unchanged. This option is the default. • flush: Good status is returned only after all write-back data for the specified volume is flushed to disk. temperature-exceeded enabled|disabled|on|off Optional. Sets whether the system forces a controller shutdown if a temperature is detected that - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 121
Command completed successfully. - Parameter 'partner-firmware-upgrade' was set to 'enabled'. Success: Command completed successfully. - The settings were changed successfully. See also • scrub vdisk • set job-parameters • set spares • show advanced-settings HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 122
to force a controller shutdown if a temperature is detected that exceeds system threshold limits. partner controller-failure enabled partner-notify disabled Success: Command completed successfully. - Auto-write-through-trigger parameters were changed. See also • show auto-write-through-trigger • show - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 123
set awt See set auto-write-through-trigger. HP P2000 G3 MSA System CLI Reference Guide 123 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 124
NOTE: Only change the read-ahead cache settings if you fully understand how the host operating system, application, and adapter move data so that you can adjust the settings accordingly. Be prepared to monitor system performance and adjust read-ahead size until you find the optimal size for your - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 125
in a sequential read and one stripe for all subsequent accesses, works well for most users in most applications. The controllers treat non-RAID and RAID-1 vdisks internally as if they have a stripe size of 64 Kbyte, even though they are not striped. HP P2000 G3 MSA System CLI Reference Guide 125 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 126
system's IQN, use the show ports command to view an iSCSI port A storage system's secret is shared by both controllers. This Command completed successfully. - The CHAP record was changed. See also • create chap-record • delete chap-records • show chap-records • show host-parameters • show iscsi - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 127
output after each full screen to wait for keyboard input. Enabled by default. When using XML API format, which is intended for scripting, disable paging. precision # Optional. Sets the number of decimal places (1-10) for display of storage-space sizes. HP P2000 G3 MSA System CLI Reference Guide 127 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 128
off For scripting, display brief XML output in api-embed format and disable paging: # set cli-parameters api-embed pager off brief on Set CLI to show output in console format: # set cli-parameters console Success: Command completed successfully. - The settings were changed successfully. See also - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 129
69.10.36.3 timezone -7 Success: Command completed successfully. Set the system to use NTP with an offset for the Bangalore, India time zone: # set controller-date ntp enabled ntpaddress 69.10.36.3 timezone +5:30 Success: Command completed successfully. HP P2000 G3 MSA System CLI Reference Guide 129 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 130
See also • set ntp-parameters • show controller-date • show ntp-status 130 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 131
Include RAID and cache messages, exclude EMP messages, and leave other message types unchanged: # set debug-log-parameters raid+ cache+ empSuccess: Command completed successfully. - Debug-log parameters were changed. See also • show debug-log-parameters HP P2000 G3 MSA System CLI Reference Guide 131 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 132
the SMART setting take effect after a rescan or a controller restart. • The DSD feature monitors disk activity within system enclosures and spins down inactive disks, based on user-specified settings. This command sets DSD parameters for available disks and global spares. To set DSD parameters for - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 133
Email Address 2 to: [email protected] Info: Set Email Server Name to: 10.1.1.10 Info: Set Email Domain Name to: mydomain.com Info: Set Email Notification Level to: warn Info: Set Email Sender Name to: RAIDsystem See also • show email-parameters • test HP P2000 G3 MSA System CLI Reference Guide 133 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 134
enclosed in double quotes. These values are used when user interfaces show enclosure-related data; for example, in output of the show enclosures command and in event-log entries related to enclosures. Syntax set enclosure [name new-name] [location location] [rack-number rack-number] [rack-position - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 135
Expander Controller A in the same enclosure: # set expander-fault-isolation encl 1 controller a enabled Success: Command completed successfully. - Expander fault isolation was enabled. See also • set expander-phy • show enclosures • show expander-status HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 136
ready Enable the PHY for disk 5 in controller B, and check the resulting status: # set expander-phy encl 1 controller b type drive phy 5 enabled Success: Command completed successfully. - Enabled PHY 5 on controller b in enclosure 1. (PHY type: drive) # show expander-status Encl Ctlr Phy Type - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 137
(257000c0ffd74c07) - The host nickname and profile were deleted. Remove a manually created host: # set host-name id MyHost Success: Command completed successfully. (MyHost) - The host entry was deleted. See also • create host • delete host • show hosts HP P2000 G3 MSA System CLI Reference Guide 137 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 138
effect without restarting the controllers. By default, iSCSI port speeds are auto-negotiated. To prevent them from acquiring inappropriately low speeds, use the set iscsi-parameters command. Syntax To set FC-port parameters: set host-parameters [controller a|b|both] [fibre-connection-mode loop|point - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 139
prompt: # set host-parameters fibre-loop-id 14,soft noprompt Info: Changes to FC loop ids will not take effect until the affected Storage Controller is restarted. Success: Command completed successfully. - The host parameters were changed successfully HP P2000 G3 MSA System CLI Reference Guide 139 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 140
to FC loop ids will not take effect until the affected Storage Controller is restarted. Success: Command completed successfully. - The host parameters were changed successfully On a system with iSCSI ports, for port A3 change the IP address: # set host-parameters ip 10.134.50.6 port a3 iscsi-ip - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 141
successfully. - iSCSI parameter(s) were changed successfully. Specify that iSCSI ports will use IPv6 addressing: # set iscsi-parameters iscsi-ip-version ipv6 Success: Command completed successfully. - iSCSI parameter(s) were changed successfully. HP P2000 G3 MSA System CLI Reference Guide 141 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 142
See also • set host-parameters • show iscsi-parameters 142 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 143
'on'. Info: Command completed successfully. - Parameter 'partner-firmware-upgrade' was set to 'off'. Success: Command completed successfully. - The settings were changed successfully. See also • scrub vdisk • set advanced-settings • show job-parameters HP P2000 G3 MSA System CLI Reference Guide 143 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 144
described in the user guide. Syntax To set a disk LED: set led disk ID enable|disable|on|off To set an enclosure LED: set led enclosure ID enable|disable|on|off Parameters disk ID The disk to locate. For disk syntax, see Command syntax on page 21. enclosure ID The enclosure to locate. enable|disable - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 145
A (disabling DHCP for both controllers, if it was enabled): # set network-parameters ip 192.168.0.10 netmask 255.255.255.0 gateway 192.168.0.1 controller a Success: Command completed successfully. - Request to set network parameters has been initiated. HP P2000 G3 MSA System CLI Reference Guide 145 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 146
See also • show network-parameters 146 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 147
system to use NTP with an offset for the Bangalore, India time zone: # set controller-date ntp enabled ntpaddress 69.10.36.3 timezone +5:30 Success: Command completed successfully. See also • set controller-date • show controller-date • show ntp-status HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 148
Sets a user's password for system interfaces (such as the CLI). A password can be entered as part of the command, or the command prompts you to enter and re-enter the new password. Syntax set password [password password] [user] Parameters password password Optional. Sets a new password for the user - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 149
available on at least one secondary volume. If this snapshot is removed, then the next replication requires a full sync to be performed. The default is 0xe000 (57344). queued # only-sync-point 65535 SnapPool1 See also • show priorities • show snap-pools HP P2000 G3 MSA System CLI Reference Guide 149 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 150
quote, and control characters, and can have a maximum of 16 bytes. A prompt that includes a space must be enclosed in double quotes. Example Set the prompt to CLI> followed by a space, and start entering another command: # set prompt "CLI> " Success: Command completed successfully CLI> set ... 150 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 151
shell CLI. telnet enabled|disabled|on|off Optional. Enables or disables the standard CLI. Example Disable unsecure HTTP connections and enable FTP: # set protocols http disabled ftp enabled Success: Command completed successfully. See also • show protocols HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 152
the remote system. system Name or network-port IP address of the remote system. Example Change the password that is stored to access a remote system: # set remote-system password Abc_123 System2 Info: Command completed successfully. (System2) - Password set Success: Command completed successfully - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 153
set replication-external-view Deprecated; use set replication-primary-volume. HP P2000 G3 MSA System CLI Reference Guide 153 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 154
- for example, if the primary volume was changed while one volume was offline - this results in a primary-volume conflict. Change the primary volume on the secondary system, then, if possible, change the primary volume on the primary system. As part of this command, you can initiate a rollback to - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 155
address ip=IPs|wwnn=WWNNs|wwpn=WWPNs] [set replication-set] replication-volume Parameters link-type FC|iSCSI Optional. Specifies the type of ports being used for the inter-system link: • FC: FC ports. • iSCSI: iSCSI ports volume: low, medium, or high. HP P2000 G3 MSA System CLI Reference Guide 155 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 156
remote-address ip=IPs|wwnn=WWNNs|wwpn=WWPNs Optional. Remote addresses associated with the replication volume. Specifies host ports on the remote system by IP address, World Wide Node Name, or World Wide Port Name. An IP address value can include a port number; for example, 10.134.11.10:3260. - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 157
"start 2010-01-01 00:01 every 1 days expires 2010-12-31 00:01" task-name Snap Sched1 Success: Command completed successfully. (Sched1) - The schedule was modified. See also • show schedule-details • show schedules • show task-details • show tasks HP P2000 G3 MSA System CLI Reference Guide 157 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 158
|MB|GB|TB|KiB|MiB|GiB|TiB] The amount by which the snap pool will be automatically expanded when the threshold level is reached. The value uses the current base, as shown by the show cli-parameters command. The unit can be specified as follows: • If base 2 is in use: B (bytes), KiB (kibibytes), MiB - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 159
GB when its error threshold is reached: # set snap-pool-policy error autoexpand autoexpansionsize 10GB SP1 Success: Command completed successfully. - The snap-pool policy was changed. See also • set priorities • set snap-pool-threshold • show snap-pools HP P2000 G3 MSA System CLI Reference Guide 159 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 160
used that triggers the error threshold policy. This value must be less than 98%. The default is 90%. snap-pool Name or serial number of the snap pool to set the threshold for. For volume syntax, see Command syntax on page 21. Example Set the warning and error thresholds for snap pool SP1 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 161
the community string for read-only access: # set snmp-parameters enable crit add-trap-host 172.22.4.171 read-community public Success: Command completed successfully. - SNMP parameters were changed. See also • set protocols • show snmp-parameters • test HP P2000 G3 MSA System CLI Reference Guide 161 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 162
Each must have enough capacity to replace the smallest disk in that vdisk. CAUTION: Existing spares not specified in this command are deleted and return to being available disks. Syntax set spares disks disks|none [vdisk vdisk] Parameters disks disks|none IDs of the disks to designate as spares, or - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 163
. info value A brief description of what the system is used for or how it's configured. Example Set the system name to Test and the contact to J. Doe: # set system name Test contact "J. Doe" Success: Command completed successfully See also • show system HP P2000 G3 MSA System CLI Reference Guide 163 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 164
(most recent existing) snapshot of the volume to the remote system. • new-snapshot: Replicate a new snapshot. • last-snapshot: Replicate the most recent existing snapshot. If this parameter is omitted, a new snapshot is replicated. name Name of the task to change. 164 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 165
VD1v2 replication-mode last-snapshot Replicate Success: Command completed successfully. (Replicate) - The task was modified. See also • create task • delete task • set schedule • show schedule-details • show schedules • show task-details • show tasks HP P2000 G3 MSA System CLI Reference Guide 165 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 166
systems usually show volume size in base 2. Disk drives usually show size in base 10. Memory (RAM and ROM) size is always shown in base 2. interfaces values Optional. Specifies the interfaces that the user can access. Multiple values must be separated by commas and no spaces. • cli: Command-line - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 167
login session. Valid values are 120-43200 seconds (2-720 minutes). The default password for user JDoe: # set user JDoe password Abc%123 Success: Command completed successfully. - The settings were changed successfully. See also • set password • show users HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 168
changing the owning controller for a vdisk, you must stop host I/O to the vdisk's volumes. Volume mappings are not affected. spin-down-delay delay Optional. Sets the period of inactivity after which the vdisk's disks and dedicated spares automatically spin down, from 1-360 minutes. Drive spin-down - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 169
of the volume to change. For volume syntax, see Command syntax on page 21. Example Rename volume V1 to V2: # set volume name V2 V1 Success: Command completed successfully. - The volume was set. See also • show host-maps • show volumes • show volume-maps HP P2000 G3 MSA System CLI Reference Guide 169 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 170
. Dynamic Spare Configuration Shows whether the storage system will automatically designate a compatible disk as a spare. Enclosure Polling Rate Shows the interval at which the storage system polls the EC (EMP) for status changes. Host Control of Caching Shows whether host control of write-back - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 171
: Disabled Partner Notify: Disabled Auto Write Back: Enabled Drive Spin Down Non-Vdisk Enable: Enabled Drive Spin Down Non-Vdisk Delay: 30 Disk Background Scrub: Disabled Basetypes • advanced-settings-table • status See also • set advanced-settings HP P2000 G3 MSA System CLI Reference Guide 171 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 172
RAID controller cache mode changes from write-back to write-through. Alias: show awt. Syntax show auto-write-through-trigger Example Show the system's auto-write-through trigger settings: # show auto-write -trigger • status See also • set auto-write-through-trigger 172 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 173
show awt See show auto-write-through-trigger. HP P2000 G3 MSA System CLI Reference Guide 173 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 174
the problem is corrected, the cache policy reverts to the value configured for each individual volume. • Enabled: Write-back. This is the normal state. • Disabled: Write-through. • Not up: The controller is not up. CompactFlash Status Shows whether the controller's CompactFlash card is installed - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 175
Flush: Enabled Volume Cache Parameters Serial Number: SN Name: V1 Cache Write Policy: write-back Cache Optimization: standard Read Ahead Size: Default Basetypes • cache-settings • cache-parameter • status See also • set cache-parameters • show volumes HP P2000 G3 MSA System CLI Reference Guide 175 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 176
records Description For iSCSI, shows all CHAP records or the record for a specific originator. This command is permitted whether or not CHAP is enabled. Syntax show chap-records [ • create chap-record • delete chap-records • set chap-record • show host-parameters 176 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 177
setting, if the selected unit is too large to meaningfully display a size, the system uses a smaller unit for that size. Temperature Scale • Fahrenheit: Temperatures are shown in degrees Fahrenheit. • Celsius: Temperatures are shown in degrees Celsius. HP P2000 G3 MSA System CLI Reference Guide 177 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 178
settings: # show cli-parameters CLI Parameters Timeout: 1800 Output Format: console Brief Mode: Disabled Base: 10 Pager: Enabled Locale: English Precision: 1 Units: Auto Temperature Scale: Celsius Basetypes • cli-parameters • status See also • set cli-parameters 178 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 179
information from show vdisks • Enclosure status information from show enclosures • Field-replaceable unit (FRU) information from show frus Basetypes • system • controllers • versions • port • drives • enclosure-list • virtual-disks • enclosures • status HP P2000 G3 MSA System CLI Reference Guide 179 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 180
is shown only if NTP is enabled. Example Show the date and time on a system that is using NTP: # show controller-date Controller Date: 2009-06-09 10:58:04 Time-Zone Offset: -6 Basetypes • time-settings-table • status See also • set controller-date • show ntp-status 180 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 181
ports Disk Bus Type Status Operational, Down, Not Installed, or Unknown Failed Over No or Yes Fail Over Reason If Failed Over is Yes, a reason for the failover appears; otherwise, Not applicable appears Position Top or Bottom Phy Isolation Enabled or Disabled HP P2000 G3 MSA System CLI Reference - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 182
(MB): 1024 Host Ports: 4 Disk Channels: 2 Disk Bus Type: SAS Status: Operational Failed Over: No Fail Over Reason: Not applicable Position: Top Phy Isolation: Enabled Controller ID: B ... Basetypes • controllers • status See also • show configuration • show frus 182 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 183
reset since a controller restart. IOPS Input/output operations controller-statistics • status See also • reset all-statistics • reset controller-statistics • show disk-statistics • show host-port-statistics • show vdisk-statistics • show volume-statistics HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 184
capi2: Internal Configuration API tracing debug messages • disk: Disk interface debug messages • dms: Snapshot feature debug messages • emp: Enclosure Management Processor debug messages • fo: Failover/recovery debug messages • fruid: FRU ID debug messages • hb: Not used • host: Host interface debug - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 185
Enabled Drive Write Back Cache: Disabled Timeout Retry Maximum: 3 Attempt Timeout: 8 Overall Timeout: 105 Drive Spin Down Non-Vdisk Enable: Disabled Drive Spin Down Non-Vdisk Delay: 0 Basetypes • drive-parameters • status See also • set disk-parameters HP P2000 G3 MSA System CLI Reference Guide 185 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 186
specified, the command shows information for all disks. NOTE: In console format, to aid reading, disks are sorted to display in order by enclosure and disk number. In other modes, output is not sorted because it is expected to be manipulated by a host application. Syntax show disks [disks|free|all - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 187
on. • Not Present: The disk slot indicates that no disk is present. Encl Enclosure number where the disk is located Slot Slot number in the enclosure where the disk is located Vendor Disk vendor Model Disk model number Serial Number Disk serial number HP P2000 G3 MSA System CLI Reference Guide 187 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 188
for all disks, by enclosure: # show disks encl Status Encl Slot Vendor Model Serial Number Size Up 1 1 vendor model SN 146.8GB Not Present 1 2 N/A N/A N/A N/A ... Basetypes • drives • enclosure-list • status See also • show vdisks 188 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 189
.1GB Basetypes • disk-statistics • status See also • reset all-statistics • reset disk-error-statistics • reset disk-statistics • show controller-statistics • show disks • show host-port-statistics • show vdisk-statistics • show volume-statistics HP P2000 G3 MSA System CLI Reference Guide 189 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 190
settings for email notification of events: # show email-parameters Email Parameters (SMTP Email Notification: Enabled Email Notify Filter: warn Email Address 1: [email protected] Email Address 2: Email Address 3: Email Address 4: Email Server: 10.1.1.10 Email Domain: mydomain.com Email Sender - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 191
WWN Name Location Rack Pos Vendor Model EMP A CH:ID Rev EMP B CH:ID Rev Midplane Type 1 WWN Controller Lab 0 4 vendor model 01:031 1115 00:031 1115 2U24-3G Basetypes • enclosures • status See also • set enclosure • show sensor-status HP P2000 G3 MSA System CLI Reference Guide 191 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 192
; use show enclosures, show frus, or show sensor-status. Shows the status of system enclosures and their components. For each attached enclosure, the command shows general SCSI Enclosure Services (SES) information followed by component-specific information. Syntax show enclosure-status Output - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 193
temperature (Celsius), voltage, or slot address Example Show enclosure status: # show enclosure-status Chassis Vendor Product ID CPLD EMP Disk 01 OK PN SN addr=0 ... Basetypes • ses • enclosure-components • status See also • show enclosures HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 194
and recommended actions, see the event descriptions reference guide. Syntax To show a certain number of events: show events [last #] [a|b|both|error] To show events by time: show events [from timestamp] [to timestamp] [a|b|both|error] To show events by ID: show events [from-event ID] [to-event ID - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 195
at 11:59:00 a.m.: # show events from 043009235900 to 050209115900 Show a range of events logged by controller A: # show events from-event a100 to-event a123 Basetypes • events • status See also • clear events • set snmp-parameters • show snmp-parameters HP P2000 G3 MSA System CLI Reference Guide 195 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 196
from a service technician. Shows diagnostic information relating to SAS Expander Controller physical channels, known as PHY lanes. For each enclosure, this command shows status information for PHYs in I/O module A and then I/O module B. Syntax show expander-status Output Encl Enclosure that contains - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 197
installed. Appears for Drive, SC-1, or Ingress PHYs when a connection problem exists such as a broken connector. • Drive removed: PHY disabled because drive slot is empty. • Unused - disabled by default: PHY is disabled by default -controller-a • status HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 198
See also • clear expander-status • set expander-fault-isolation • set expander-phy 198 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 199
• LOWER IOM SLOT: Controller module or expansion module B • LEFT PSU SLOT: Power supply module on the left, as viewed from the back • RIGHT PSU SLOT: Power supply module on the right, as viewed from the back Configuration SN Configuration serial number HP P2000 G3 MSA System CLI Reference Guide 199 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 200
FRU Status • Absent: Component is not present • Fault: One or more subcomponents has a fault • OK: All subcomponents are operating normally • Not Available: Status is not available Basetypes • enclosure-fru • status 200 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 201
number of the volume seen by the host. LUN LUN used to access the volume. Access Type of host access to the volume: • read-write: Read and write • read-only: Read only • no-access: No access Ports Controller host ports that the mapping applies to. HP P2000 G3 MSA System CLI Reference Guide 201 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 202
Name (Host3) Profile (Standard) ] Mapping: Name Serial Number LUN Access Ports vd2_v2 SN 0 read-write A1,A2,B1,B2 vd2_v0 SN 10 read-only A1,B1 vd2_v1 SN no-access Basetypes • host-view • status See also • show hosts • show volume-maps • show volumes 202 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 203
IP address. PIP-Netmask iSCSI only. Primary subnet mask IP address. MAC iSCSI only. Unique Media Access Control (MAC) hardware address, also called the physical address. SIP iSCSI only. Secondary IP address. This field is only displayed during failover. HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 204
SIP-Netmask iSCSI only. Secondary subnet mask IP address. This field is only displayed during failover. MAC(S) iSCSI only. Secondary MAC address. This field is only displayed during failover. Example Show port information for a system with two FC ports: # show host-parameters Ports Media Target - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 205
See also • set host-parameters • show ports HP P2000 G3 MSA System CLI Reference Guide 205 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 206
6GB 32.5TB 33 Basetypes • host-port-statistics • status See also • reset all-statistics • reset host-port-statistics • show controller-statistics • show disk-statistics • show vdisk-statistics • show volume-statistics • show host-port-statistics • show ports 206 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 207
FC 100000A0B8040BAD My-host Yes Yes OpenVMS FC 1111111111111111 testhost No No HP-UX FC iqn.1991-05.com.microsoft:myhost.domain Server1 No No Standard iSCSI Basetypes • hosts • status See also • create host • delete host • set host-name HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 208
• Storage Controller firmware version and loader version • Controller module serial number • Media Access Control (MAC) address • Network port IP address Example Show inquiry data for a system in which controller B is not installed: # show inquiry Inquiry Controller A Management Controller Code - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 209
parameters: # show iscsi-parameters iSCSI Parameters CHAP: Disabled Jumbo Frames: Disabled iSNS: Disabled iSNS IP: 0.0.0.0 iSNS Alt IP: 0.0.0.0 iSCSI Speed: auto iSCSI IP Version: 4 Basetypes • iscsi-parameters • status See also • set iscsi-parameters HP P2000 G3 MSA System CLI Reference Guide 209 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 210
Output Vdisk Background Scrub Shows whether disks in vdisks are automatically checked for disk defects to ensure system health. Partner Firmware Upgrade Shows whether component firmware versions are monitored and will be automatically upgraded on the partner controller. Utility Priority Priority at - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 211
without an installed license. Licensed Snapshots Number of snapshots allowed by the installed license. In Shows whether the VSS (Volume Shadow Copy Service) Hardware Provider is enabled or disabled. VSS Expires • Never. Always enabled and doesn't expire. HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 212
information about the installed license: # show license License Key: 0004b56810eb357d0f75d65c13c6e846 Maximum Licensable Snapshots: value Base Maximum Snapshots: value Licensed Snapshots: value In-Use Snapshots: value Snapshots Expire: 2 days remaining Volume Copy: Enabled Volume Copy Expires: Never - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 213
# show master-volumes Vdisk Serial Number Name Size Status Status-Reason Snap-pool Name Snapshots Snap Data Rollback VD1 SN MV1 14.9GB Available --- SP1 1 1090.5MB --- VD1 SN MV2 9999.9MB Unavailable SP Not Accessible SP2 0 0B 0% HP P2000 G3 MSA System CLI Reference Guide 213 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 214
Basetypes • master-volumes • status See also • convert master-to-std • create master-volume • delete all-master-volumes • delete master-volume • expand volume • rollback master-volume 214 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 215
Address: 00:C0:FF:0A:43:18 Addressing Mode: Manual Network Parameters Controller B IP Address: 172.22.1.201 Gateway: 172.22.1.1 Subnet Mask: 255.255.255.0 MAC Address: 00:C0:FF:0A:43:26 Addressing Mode: Manual Basetypes • network-parameters • status HP P2000 G3 MSA System CLI Reference Guide 215 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 216
See also • set network-parameters 216 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 217
server; or none Example Show NTP status for the system: # show ntp-status NTP Status ---------NTP Status: activated NTP Server Address: 69.10.36.3 Last Server Contact: 2009-12-04 16:24:42 Basetypes • ntp-status • status See also • set controller-date HP P2000 G3 MSA System CLI Reference Guide 217 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 218
show host-parameters command. Syntax show ports Output Ports Controller ID and port number Media • FC(P): Fibre Channel Point-to-Point • FC(L): Fibre Channel-Arbitrated Loop • FC(-): Not applicable, as when the port is disconnected • SAS: Serial Attached SCSI • iSCSI: Internet SCSI Target ID Port - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 219
ports: # show ports Ports Media Target ID Status Speed(A) Speed(C) A1 SAS WWPN Disconnected Topo(C) Width Direct 4 A2 SAS WWPN Disconnected Topo(C) Width Direct 4 Basetypes • port • status See also • set host-parameters HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 220
information about each power supply in the storage system. Syntax show power-supplies Output Serial Number Power supply serial number Name Power supply identifier and location Rev Power supply revision number Model Power supply model number - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 221
Snapshot 0xc000 (default) Common Sync Point Snapshot 0x8000 (default) Only Sync Point Snapshot 0xe000 (default) Queued Snapshot 0x2000 (default) Basetypes • attribute-priorities • status See also • set priorities • show snap-pools HP P2000 G3 MSA System CLI Reference Guide 221 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 222
disabled. Syntax show protocols Example Show the status of service and security protocols: # show protocols Service and Security Protocols Web Browser Interface (HTTP): Enabled Secure Web Browser Interface (HTTPS): Enabled Command Line Interface (Telnet): Enabled Secure Command Line Interface (SSH - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 223
Redundancy Mode: Active-Active ULP Redundancy Status: Redundant Controller A Status: Operational Controller A Serial Number: 00C0FF0A4318 Controller B Status: Operational Controller B Serial Number: 00C0FF0A4326 Basetypes • redundancy • status HP P2000 G3 MSA System CLI Reference Guide 223 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 224
. A value other than 0 is a timestamp indicating that the data has been updated. If the value has changed since the last time you called this command then the data has changed. Syntax show refresh-counters Basetypes • refresh-counters • status See also • set cli-parameters 224 Alphabetical list of - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 225
Controller A: 10.122.1.21 IP Address Controller B: 10.122.1.22 Username: manage Status: Connected Last Connected: 2009-11-10 12:58:15 Basetypes • remote-system • status See also • create remote-system • delete remote-system • remote • set remote-system HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 226
time when replication started on the replication volume. Last Update Date and time when the image was last updated (either due to an ongoing replication operation or the replication being completed). Suspended Date and time when the image was suspended or resumed. 226 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 227
Start Date/Time Last Update Suspended Est Complete Time Complete N/A 2009-01-14 14:52:09 2009-01-14 14:52:33 N/A N/A 00:00:24 Basetypes • replication-volume-summary • status See also • show replication-sets • show replication-volumes HP P2000 G3 MSA System CLI Reference Guide 227 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 228
about replication sets on the local system. You can view information about all replication sets or a specific replication set. Syntax show replication-sets [replication-set] Parameters replication-set Optional. Name or serial number of a replication set or volume for which to display replication-set - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 229
that a problem is preventing half the available bandwidth from being used. • For a local primary or secondary volume, this field shows N/A. Remote Address The address of each host port in the remote system through which the volume is accessible. HP P2000 G3 MSA System CLI Reference Guide 229 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 230
3260 rvd01_v001 SN vd01_v001 1800 Medium Online N/A OK SN Online Retry iSCSI Oldest 60 Not Attempted N/A Local 32 Connected Ports Remote Address N/A IP=10.134.9.40:3260 N/A IP=10.134.9.41:3260 N/A IP=10.134.9.42:3260 N/A IP=10.134.9.43:3260 230 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 231
Ports Remote Address N/A FCPortWWN=207000c0ff000bee N/A FCPortWWN=217000c0ff000bee N/A FCPortWWN=247000c0ff000bee N/A FCPortWWN=257000c0ff000bee Basetypes • replication-set • status See also • show replication-images • show replication-volumes HP P2000 G3 MSA System CLI Reference - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 232
the remote (primary) system in preparation for replication. Status-Reason More information about the status value, or N/A for Online status. Monitor Replication volume monitoring status: • OK: Communication to the remote volume is successfully occurring on the iSCSI network. • Failed: Communication - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 233
that a problem is preventing half the available bandwidth from being used. • For a local primary or secondary volume, this field shows N/A. Remote Address The address of each host port in the remote system through which the volume is accessible. HP P2000 G3 MSA System CLI Reference Guide 233 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 234
60 Local 32 Connected Ports Remote Address N/A IP=10.134.9.40:3260 N/A IP=10.134.9.41:3260 N/A IP=10.134.9.42:3260 N/A IP=10.134.9.43:3260 Basetypes • replication-volume • status See also • set replication-volume-parameters • show replication-sets 234 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 235
1 A Out Port Up OK 1 B Out Port Up OK Encl Ctlr Name Status Health 2 A In Port Up OK 2 A Out Port Disconnected N/A 2 B In Port Up OK 2 B Out Port Disconnected N/A Basetypes • expander-ports • status HP P2000 G3 MSA System CLI Reference Guide 235 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 236
Details -----------Source Volume: VD1_V1 Source Volume Serial: SN Prefix: VD1_V1 Count: 4 Last Created: VD1_V1_S0001 Snapshot Name Snapshot Serial VD1_V1_S0001 SN Basetypes • schedules • status See also • create schedule • delete schedule • show schedules 236 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 237
information about all task schedules. Syntax show schedules Example Show information about all task schedules: # show schedules Schedule Details Schedule Name: Volume Name: bTx_v002 Primary Volume Serial Number: SN Prefix: bTx_v002_01 Mode: new-snapshot HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 238
SN bTx_v002_01_R0024 SN bTx_v002_01_R0025 SN bTx_v002_01_R0026 SN bTx_v002_01_R0027 SN bTx_v002_01_R0028 SN bTx_v002_01_R0029 SN bTx_v002_01_R0030 SN Basetypes • schedules • status See also • create schedule • delete schedule • show schedule-details 238 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 239
controller startup. • Unrecoverable: The enclosure management processor (EMP) cannot communicate with the sensor. • Unknown: The sensor is present but status is not available. • Not Installed: The sensor is not present Cell 4 Voltage-Ctlr B 2.00 OK HP P2000 G3 MSA System CLI Reference Guide 239 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 240
: left-PSU 7.24 OK Current 12V Loc: right-PSU 5.80 OK Current 5V Loc: right-PSU 7.15 OK Basetypes • sensors • status 240 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 241
controller is up (active), down (shut down), or not installed. Example Show the shutdown status of each controller: # show shutdown-status Storage Controller A up Storage Controller B down Basetypes • shutdown-status • status See also • restart • shutdown HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 242
pools owned by controller A: # show snap-pools controller a Vdisk Serial Number Name Size Free Master Volumes Snapshots Status R5 SN SP1 5368.7MB 4265.6MB 1 2 Available Threshold %Usage Policy SizeToExpand Warning 75% Notify Only N/A Error 90% Auto Expand 10.7GB Critical - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 243
Basetypes • snap-pools • status See also • create snap-pool • delete snap-pool • expand snap-pool • set snap-pool-policy • set snap-pool-threshold HP P2000 G3 MSA System CLI Reference Guide 243 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 244
omitted, snapshots owned by either controller are shown. master-volume volume Optional. Shows snapshots associated with the specified master volume name or serial number. For volume syntax, see Command syntax on page 21. snap-pool volume Optional. Shows snapshots associated with the specified snap - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 245
SN vd03_V1_s001 2011-01-16 10:15:55 Available N/A vd03_V1 spvd03_V1 352.8MB 352.8MB 0B 0x6000 0x0000 Standard snapshot Basetypes • snapshots • status See also • show master-volumes • show snap-pools HP P2000 G3 MSA System CLI Reference Guide 245 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 246
IP# IP address of each trap host SNMP read community Community string for read-only access (not shown to Monitor users) SNMP write community Community string for write access (not shown to Monitor users) Example Show SNMP notification settings: # show snmp-parameters SNMP Trap Notification Level - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 247
-ID SCSI Product ID: product-ID Enclosure Count: 2 Health: OK Health Reason: Supported Locales: English, Spanish, French, German, Italian, Japanese, Dutch, Chinese-Simplified, Chinese-Traditional, Korean Basetypes • system • status See also • set system HP P2000 G3 MSA System CLI Reference Guide 247 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 248
. Host Profiles Enabled Shows whether host profiles are enabled, which determines whether LUN 0 can be assigned to volume mappings. Number of Host Ports Number of host-interface ports in the controller enclosure Maximum Disks Number of disks that the system supports Maximum Volumes Number of volumes - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 249
about a specified task. Syntax show task-details task Parameters task Task while processing the task, or blank Source Volume Standard or master volume name Source Volume Serial Volume serial number Prefix Label that identifies snapshots taken, or blank HP P2000 G3 MSA System CLI Reference Guide 249 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 250
to run • Ready: Task is ready to run • Active: Task is running • Error: Task has an error • Invalid: Task is invalid 250 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 251
Serial number of the destination vdisk Prefix Label that identifies copies created by this task. Volume names have the format prefix_c#, where # starts at 001. Modified Data • modified: is running • Error: Task has an error • Invalid: Task is invalid HP P2000 G3 MSA System CLI Reference Guide 251 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 252
, or blank Primary Volume Name Name of the volume to replicate Primary Volume Serial Number Serial number of the volume to replicate Prefix Label that identifies copies created by this task. Volume names have the format occurred while processing the task, or blank 252 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 253
Volume Serial: SN Prefix: MV Count: 1 Last Created: MV_S0001 Snapshot Name Snapshot Serial MV_S0001 SN Basetypes • tasks • status See also • create schedule • create task • delete task • set task • show schedule-details • show schedules • show tasks HP P2000 G3 MSA System CLI Reference - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 254
information about all tasks. Syntax show tasks Output For a TakeSnapshot task: Task while processing the task, or blank Source Volume Standard or master volume name Source Volume Serial Volume serial number Prefix Label that identifies snapshots created blank 254 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 255
running • Error: Task has an error • Invalid: Task is invalid Task State Current step of the task: • Start • VerifyVolume • CreateName • ObtainMap • UnmapVolume • CreateVolume • RemapVolume • VerifyCreatedVolume HP P2000 G3 MSA System CLI Reference Guide 255 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 256
Volume Name of the volume to be copied Source Volume Serial Serial number of the volume . Volume names last volume created by Volume Name of the volume to replicate Primary Volume Serial Number Serial number of the volume to replicate Prefix Label that identifies copies created by this task. Volume - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 257
Replicate a new snapshot of the primary volume. • last-snapshot: Replicate the most recent existing snapshot of the primary volume. Last Created Name of the last volume created by the task, or blank Last error occurred while processing the task, or blank HP P2000 G3 MSA System CLI Reference Guide 257 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 258
show tasks Tasks ----Task Name: Snap Task Type: TakeSnapshot Status: Ready Task State: Start Error Message: Task Details -----------Source Volume: MV Source Volume : Start Error Message: Task Details -----------Source Volume: VD1_V1 Source Volume Serial: SN Destination Vdisk: VD2 Destination Vdisk - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 259
State: Start Error Message: Task Details -----------Primary Volume Name: VD1_V2 Primary Volume Serial Number: SN Prefix: VD1_V2 Mode: new- schedule • create task • delete task • set task • show schedule-details • show schedules • show task-details HP P2000 G3 MSA System CLI Reference Guide 259 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 260
which case it will be lost and data will differ between the host and disk. Syntax show unwritable-cache Example Show the percentage of unwritable cache data in the system: # show unwritable-cache Unwritable System Cache Percent of unwritable cache in controller A: 0 Percent of unwritable cache in - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 261
x manage manage,monitor Standard English x x x x monitor monitor Standard English x x Rivera manage,monitor Standard Spanish x x Basetypes • users • status See also • create user • delete user • set user HP P2000 G3 MSA System CLI Reference Guide 261 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 262
preferred owner is offline Pref Controller that owns the vdisk and its volumes during normal operation RAID Vdisk RAID level Disks Number of disks in the vdisk Spr Number of spares assigned to the vdisk Chk • For RAID levels except NRAID, RAID 1, and RAID 50, the configured chunk size for the vdisk - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 263
serial number Drive Spin Down Shows whether drive spin-down is enabled for the vdisk Spin Down Delay Shows the number INIT 0% SN Disabled Basetypes • virtual-disks • status See also • create vdisk • delete vdisks • expand vdisk • set vdisk HP P2000 G3 MSA System CLI Reference Guide 263 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 264
zero if it has not been requested or reset since a controller restart. IOPS Input/output operations per second, calculated over the interval since show controller-statistics • show disk-statistics • show host-port-statistics • show vdisks • show volume-statistics 264 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 265
show versions See versions. HP P2000 G3 MSA System CLI Reference Guide 265 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 266
# show volumecopy-status controller a VC Volume Name Serial Number Vdisk Source Volume Progress Status Status-Reason MV1-copy SN VD1 MV1 7% Unavailable VC In Progress Basetypes • volume-copy-status • status See also • abort volumecopy • volumecopy 266 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 267
) ] Mapping: Ports LUN Access Host-Port-Identifier Nickname Profile A1,B1 101 read-write 207000c0ff001121 Host2 Standard A1 100 read-only 207000c0ff001122 Host1 Standard not-mapped all other hosts Standard Basetypes • volume-view • status HP P2000 G3 MSA System CLI Reference Guide 267 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 268
See also • show host-maps • show hosts • show volumes 268 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 269
Number Volume serial number Example Show volume names and serial numbers: # show volume-names Name Serial Number Data SN Data_s001 SN spData SN vd1_v1 SN Basetypes • volume-names • status See also • show volume-maps • show volumes HP P2000 G3 MSA System CLI Reference Guide 269 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 270
|standard|primary-volume |secondary-volume|replication-volume Optional. Specifies the type of volumes to show. The replication-volume option shows primary and secondary volumes. volumes Optional. Names or serial numbers of volumes to show information about. For volume syntax, see Command syntax on - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 271
back standard Default snap-pool PTSNAP N/A VD1 V4 35.9GB SN write-back standard Default snapshot PTSNAP N/A Basetypes • volumes • status See also • create volume • delete volumes • expand volume • set volume • show vdisks • show volume-maps HP P2000 G3 MSA System CLI Reference Guide 271 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 272
SN 0B 0 110 15 651.7KB 61.4KB Basetypes • volume-statistics • status See also • reset all-statistics • reset volume-statistics • show controller-statistics • show disk-statistics • show host-port-statistics • show vdisk-statistics • show volumes 272 Alphabetical list of commands - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 273
in controller A, B, or both. If this parameter is omitted, the command affects the controller being accessed. Example Shut down the Storage Controller in controller A: # shutdown a Info: Shutting down SC a... See also • restart • show shutdown-status HP P2000 G3 MSA System CLI Reference Guide 273 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 274
to move its disks into this system. Starting a vdisk is part of the process for moving a secondary volume from a primary system into a secondary system. The process to move a secondary volume is: 1. In the system where the secondary volume resides: a. Detach the secondary volume. b. If the secondary - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 275
a secondary volume and its snap pool: # stop vdisk vd1 Success: Command completed successfully. # stop vdisk vd2 Success: Command completed successfully. See also • detach replication-volume • reattach replication-volume • show vdisks • start vdisk HP P2000 G3 MSA System CLI Reference Guide 275 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 276
the current replication operation on the specified replication volume. This command must be issued on the system that owns the secondary volume. Once suspended, the replication must be resumed or aborted to allow the replication volume to resume normal operation. Syntax suspend replication [set - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 277
option and remain for backward compatibility only. Example Test email and SNMP notification of events: # test notification Success: Command completed successfully. - The test event was sent. See also • set email-parameters • set snmp-parameters HP P2000 G3 MSA System CLI Reference Guide 277 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 278
on a vdisk having critical status. Instead, add a spare and let the system reconstruct the vdisk. The trust command resynchronizes the time and date stamp and any other metadata on a bad disk. This makes the disk an active member of the vdisk again. You might need to do this when a vdisk is offline - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 279
(leaving explicit mappings unchanged): # unmap volume V2 Info: The volume was unmapped. (V2) Success: Command completed successfully. - The volume(s) were unmapped. See also • map volume • show host-maps • show hosts • show volume-maps • show volumes HP P2000 G3 MSA System CLI Reference Guide 279 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 280
system's name or the IP address of one of its controller network ports. If this parameter is omitted, links between the local controllers are verified. link-type FC|iSCSI|ALL Optional. Specifies the type of host-port links to verify: • FC: Verify FC-to-FC links only. • iSCSI: Verify iSCSI-to-iSCSI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 281
system System2: # verify links remote-system System2 Port Type Links A1 FC A2 FC A3 iSCSI A1,A2,B1,B2 A4 iSCSI A1,A2,B1,B2 B1 FC B2 FC B3 iSCSI A1,A2,B1,B2 B4 iSCSI A1,A2,B1,B2 Basetypes • remote-links See also • show remote-systems • verify remote-link HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 282
command from the primary system to the secondary system, and then from the secondary system to the primary system. Syntax verify remote-link remote-system system [link-type FC|iSCSI|ALL] Parameters remote-system system The remote system's name or the IP address of one of its controller network ports - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 283
, see the topic about resolving scrub errors in the Event Descriptions Reference Guide. Example Verify vdisk vd1: # verify vdisk vd1 Info: Command completed successfully. (vd1) - The verify was started on vdisk vd1. See also • abort verify • show vdisks HP P2000 G3 MSA System CLI Reference Guide 283 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 284
is shown Example Show firmware-bundle version information for a system in which controller B is not installed: # versions Controller A Versions Bundle Version: value Build Date: value Controller B Versions Bundle Version: Not Present Build Date: Not Present Show detailed version information - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 285
the snapshot in the copy. This parameter applies only when the source volume is a snapshot. • yes: Include modified snapshot data. • no: Exclude modified snapshot data. If this parameter is omitted for a snapshot, modified snapshot data is excluded. HP P2000 G3 MSA System CLI Reference Guide 285 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 286
on vdisk VD2: # volumecopy source-volume MV1 dest-vdisk VD2 MV1copy The source volume MUST be unmounted from all hosts prior to starting a volume copy. Ready to continue? yes Success: Command completed successfully. (MV1) - The volume copy started. # show volumes Vdisk Name ... Type VD2 MV1 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 287
property may show. For descriptions of other elements see Table 3 on page 18. • Example output from a command that uses the basetype. Some basetypes are used by multiple commands. • References to embedded or nested basetypes that the output may show. HP P2000 G3 MSA System CLI Reference Guide 287 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 288
vdisk scrub finishing and starting again. The default is 24 hours. Shows whether component firmware versions are monitored and will be automatically upgraded on the partner controller. • Disabled: Partner firmware upgrade is disabled. • Enabled: Partner firmware upgrade is enabled. This is the - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 289
fully charged or fails. • Disabled: The super-capacitor failure trigger is disabled. • Enabled: The super-capacitor failure trigger is enabled. This is the default. string Numeric equivalents for super-cap-failure values. • 0: Disabled • 4: Enabled HP P2000 G3 MSA System CLI Reference Guide 289 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 290
fan-failure values. • 0: Disabled • 128: Enabled string Shows whether the system will shut down a controller when its temperature exceeds system threshold limits. • Disabled: The over-temperature trigger is disabled. This is the default. • Enabled: The over-temperature trigger is enabled. string - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 291
auto-write-back" type="string">Enabled 1 Disabled 0 HP P2000 G3 MSA System CLI Reference Guide 291 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 292
0 Disabled 0 ... 292 XML API basetype properties - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 293
is available on at least one secondary volume. If this snapshot is removed, then the next replication requires a full sync to be performed. • Queued Snapshot: A snapshot that name="priority-value" type="string">0x6000 (default) ... HP P2000 G3 MSA System CLI Reference Guide 293 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 294
fan fails. • Disabled: The fan failure trigger is disabled. This is the default. • Enabled: The fan failure trigger is enabled. Shows whether the system will shut down a controller when its temperature exceeds system threshold limits. • Disabled: The over-temperature trigger is disabled. This is the - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 295
Enabled ... HP P2000 G3 MSA System CLI Reference Guide 295 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 296
-tolerant environment because it improves the performance of write operations and throughput. This is the default. • write-through: Write-through caching significantly impacts performance by waiting for data to be completely written to disk before signaling the host that the write is complete. Use - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 297
type="string">standard 0 Default -1 ... HP P2000 G3 MSA System CLI Reference Guide 297 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 298
(Unified LUN Presentation). • Single Controller: There is only a single controller in the enclosure. Numeric equivalents for operation-mode values. • 8: Active-Active ULP • 9: Single Controller Example # show cache-parameters vdRx_v001_s001 ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 299
CHAP, the secret that the originator uses to authenticate the recipient. Example # show chap-records ... ... HP P2000 G3 MSA System CLI Reference Guide 299 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 300
ends. Valid values are 120-43200 seconds (2-720 minutes). The default is 1800 seconds (30 minutes). string • console: Supports interactive use of the CLI by displaying command output in easily readable format. This format automatically sizes fields according to content, adjusts content to window - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 301
-size-units values. • 0: Auto • 1: MB • 2: GB • 3: TB string • Fahrenheit: Temperatures are shown in degrees Fahrenheit. • Celsius: Temperatures are shown in degrees Celsius. This is the default. HP P2000 G3 MSA System CLI Reference Guide 301 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 302
rate. The default is 30 seconds. string The logged-in user's experience level. • Novice • Standard • Advanced • Diagnostic string Numeric equivalents for user-type values. • 1: Novice • 2: Standard • 3: Advanced • 4: Diagnostic string The logged-in user name. Example # show cli-parameters - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 303
controller B. string • A: Controller A. • B: Controller B. string Numeric equivalents for controller-id values. • 0: B • 1: A string • Controller A CompactFlash • Controller B CompactFlash string • Not Installed • Installed is OK. HP P2000 G3 MSA System CLI Reference Guide 303 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 304
... 304 XML API basetype properties - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 305
="controller-id" type="string">B 0 Controller B Cache Parameters Enabled HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 306
0 Installed 1 Enabled - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 307
Numeric equivalents for status values. • 0: Operational • 1: Down • 2: Not installed • 3: Unknown Indicates whether the controller has failed over to the partner controller. • No: The controller is not failed over. • Yes: The controller is failed over. HP P2000 G3 MSA System CLI Reference Guide 307 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 308
the controller. string Shows whether hosts are prevented from using the SCSI MODE SELECT command to change the storage system's write-back cache setting. • No: Hosts are permitted to disable write-back cache. • Yes: Hosts are prevented from disabling write-back cache. This is the default. string - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 309
"> controller_a A 1 SN HP P2000 G3 MSA System CLI Reference Guide 309 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 310
">6 1 2048 4 2 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 311
found in cache. For the controller that owns the volume, the number of times the block to be read is not found in cache. For the controller whose host ports had I/O activity, the number of > 0 HP P2000 G3 MSA System CLI Reference Guide 311 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 312
name="bytes-per-second" units="B" type="string">0B 0 0 0 0 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 313
string Shows whether standard debug messages for an I/O interface driver are enabled for inclusion in the Storage Controller debug log. • Off: Disabled. • On: Enabled. This is the default. string Numeric equivalents for ioa values. • 0: Off • 1: On HP P2000 G3 MSA System CLI Reference Guide 313 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 314
misc-numeric rcm rcm-numeric raid raid-numeric string Shows whether resource-count debug messages for an I/O interface driver are enabled for inclusion in the Storage Controller debug log. • Off: Disabled. This is the default. • On: Enabled. string Numeric equivalents for iob values. • 0: Off - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 315
string Shows whether debug messages for auto-write-through cache triggers are enabled for inclusion in the Storage Controller debug log. • Off: Disabled. This is the default. • On: Enabled. string Numeric equivalents for awt values. • 0: Off • 1: On HP P2000 G3 MSA System CLI Reference Guide 315 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 316
string Numeric equivalents for res2 values. • 0: Off • 1: On string Shows whether Internal Configuration API tracing messages are enabled for inclusion in the Storage Controller debug log. • Off: Disabled. This is the default. • On: Enabled. string Numeric equivalents for capi2 values. • 0: Off - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 317
="string">Off 0 Off 0 ... HP P2000 G3 MSA System CLI Reference Guide 317 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 318
operations currently being serviced. For port 1, the number of SMART events recorded. For port 1, the number of timeouts accessing the disk. For port 1, the number of times the disk did not respond. For port 1, the number of attempts by the storage system to spin up the disk. For port 1, the number - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 319
system, or generated by the disk and not categorized as media errors. uint32 For port 2, the number of times blocks were reassigned to alternate locations. Example # show disk-statistics ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 320
. • Detect-Only: Each new disk inserted in the system retains its current write- back cache setting. • Enabled: Disk write-back cache is enabled for all disks. This is the default. • Disabled: Disk write-back cache is disabled for all disks. Numeric equivalents for drive-write-back-cache values - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 321
-overall-timeout" type="uint8">105 Disabled 0 0 ... HP P2000 G3 MSA System CLI Reference Guide 321 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 322
-ID.slot-number. Enclosure ID. Disk slot ID. Disk's enclosure ID and slot ID. For internal use only. SCSI ID assigned to this disk for the primary channel. Unformatted size value in 512-byte blocks. Disk serial number. Disk vendor. Disk model. Disk firmware revision level. Shows the disk's state or - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 323
ID. string Port 1 WWNN. string Port 1 WWPN. uint32 Port 1 unit number. uint32 Port 2 channel number. uint32 Port 2 device ID. string Port 2 WWNN. string Port 2 WWPN. uint32 Port 2 unit number. uint8 Numeric code indicating why the disk is down. HP P2000 G3 MSA System CLI Reference Guide 323 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 324
Shows which controller a single-ported disk is connected to. • A: Controller A. • B: Controller B. string For internal use only. string Serial number of the disk's vdisk, if any. string Enclosure WWN. string Disk status. • Up: The disk is present and is properly communicating with the expander - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 325
PROPERTY> 0 0 0 5000c50006d73afb HP P2000 G3 MSA System CLI Reference Guide 325 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 326
-p2-channel" type="uint32">1 0 0 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 327
email-notify-address-3" type="string"> 10.64.10.104 mycompany.com HP P2000 G3 MSA System CLI Reference Guide 327 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 328
system ... 328 XML API basetype properties - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 329
Voltage: Voltage sensor • Disk: Disk drive module enclosure-unit- string Component ID. number status string Component status. • Absent: The component is not present. • Error: The ="additional-data" type="string">temp=35 ... HP P2000 G3 MSA System CLI Reference Guide 329 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 330
: Controller module Configuration serial number. string FRU status. • Absent: Component is not present. • Fault: At least one subcomponent has a fault. • OK: All subcomponents are operating normally. • Not Available: Status is not available. Example # show frus ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 331
2008-09-30 07:00:00 SN OK ... HP P2000 G3 MSA System CLI Reference Guide 331 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 332
Present • 6: Unknown • 7: Unavailable • 20: Spun Down uint32 Enclosure ID. uint32 Disk slot ID. string Disk vendor. string Disk model. string Disk serial number. string Disk 512-byte blocks. Example # show disks encl ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 333
• Unavailable • Spun Down Numeric equivalents for status values. • 0: Unsupported • 1: Up • 2: Error • 3: Warning • 4: Unrecoverable • 5: Not Present • 6: Unknown • 7: Unavailable • 20: Spun Down Midplane serial number. • OK • Degraded • Fault • N/A HP P2000 G3 MSA System CLI Reference Guide 333 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 334
. string Firmware revision of controller A's EMP. string Firmware revision of controller B's EMP. uint8 Number of rows of disk slots. uint8 Number of columns of disk slots. uint8 Number of disk slots in this enclosure string • vertical: Disks are oriented vertically. • horizontal: Disks are oriented - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 335
name="name" type="string"> 0 0 HP P2000 G3 MSA System CLI Reference Guide 335 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 336
name="number-of-disks" type="uint8">24 vendor" type="string">HP 159 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 337
severity" type="string">INFORMATIONAL 0 The Storage Controller resumed communications with the Management Controller. ... HP P2000 G3 MSA System CLI Reference Guide 337 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 338
Enclosure ID. string • A: Controller A. • B: Controller B. string Numeric equivalents for controller values. • 0: B • 1: A name string Out Port name-numeric status status-numeric health health-numeric health-reason string 3 string Expander port status. • Up • Warning • Error • Not Present - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 339
> N/A 4 All PHYs are disconnected ... HP P2000 G3 MSA System CLI Reference Guide 339 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 340
string Numeric equivalents for status values. • 0: Up • 1: Warning • 2: Error • 3: Not Present • 4: Unknown • 6: Disconnected uint32 Fan speed (RPM). string Fan unit position, as viewed from the back of the enclosure. • Left • Right • Top • Bottom string Numeric equivalents for position values - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 341
string Firmware revision of a fan unit in a D2700 drive enclosure, or N/A. string Hardware revision of a fan unit in a D2700 drive enclosure, or N/A. Example # show power PROPERTY> N/A ... HP P2000 G3 MSA System CLI Reference Guide 341 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 342
). • Point-to-Point: Fibre Channel point-to-point. • Auto: Loop preferred, otherwise point-to-point, based on the detected connection type. This is the default. Primary loop ID; 0-125 or blank if not applicable. Example # show ports ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 343
controller was restarted. Unformatted data-written value. The number of pending I/O operations currently being serviced. Example # show host-port-statistics ... 0 ... HP P2000 G3 MSA System CLI Reference Guide 343 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 344
be assigned to a mapping. • HP-UX: The host allows LUN 0 to be assigned to a mapping and uses Flat Space Addressing. Host interface type. • FC • SAS • iSCSI For internal use only. For internal use only. Example # show hosts ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 345
name="id" key="true" type="string">2ffc00c0dd13a447 Lab_server Standard ... ... Embedded basetypes • host-view-mappings HP P2000 G3 MSA System CLI Reference Guide 345 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 346
read and write access to the volume. • read-only: Host has read access to the volume. • no-access: Host is denied access to the volume. string Controller host ports assigned to the mapping. Example # show host-maps ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 347
-number" type="string">SN 00:C0:FF:29:41:05 10.134.101.50 ---- ... HP P2000 G3 MSA System CLI Reference Guide 347 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 348
equivalents for iscsi-speed values. • 0: auto • 1: 1Gbps uint8 iSCSI IP version. • 4: iSCSI host port addresses use IPv4 format. This is the default. • 6: iSCSI host port addresses use IPv6 format. Example # show iscsi-parameters ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 349
name="isns-alt-ip" type="string">0.0.0.0 auto 0 4 ... HP P2000 G3 MSA System CLI Reference Guide 349 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 350
string string Description iSCSI IP version. • 4: iSCSI host port addresses use IPv4 format. This is the default. • 6: iSCSI host port addresses use IPv6 format. Primary IP address. Primary gateway IP address. Primary subnet mask IP address. Primary MAC address. Secondary IP address, displayed only - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 351
">Disabled 0 Medium 1 ... HP P2000 G3 MSA System CLI Reference Guide 351 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 352
Number of days remaining string Shows whether the Volume Copy feature is enabled. • Disabled: Volume Copy is disabled. • Enabled: Volume Copy is enabled. string Numeric equivalents for volume-copy values. • 0: Disabled • 1: Enabled string Shows when the Volume Copy license will expire. • Never - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 353
Numeric equivalents for vss values. • 0: Disabled • 1: Enabled string Shows when the VSS (Volume Shadow Copy Service) Hardware Provider will expire. • Never: Always enabled and doesn't > 128 HP P2000 G3 MSA System CLI Reference Guide 353 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 354
-numeric" type="string">0 Enabled 1 Never 0 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 355
controller B failure. 8191 2011-02-11 08:38:21 1297413501 ... HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 356
complete if a rollback is in progress. • ---: No rollback is in progress. Example # show master-volumes ... vd01 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 357
">0 Disabled 0 ... HP P2000 G3 MSA System CLI Reference Guide 357 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 358
ntp-contacttime Type Description string Shows whether use of Network Time Protocol (NTP) is enabled. • activated: NTP is enabled. • deactivated: NTP is disabled. This is the default. string • 0.0.0.0: NTP server IP address is not set. • NTP server IP address. string • Date and time, in - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 359
default expand value in 512-byte blocks. Example # show Expand 10.7GB 20971520 ... HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 360
Description string Controller host port ID in the form hostport_controller-ID-and-portnumber. string • A: Controller A. • B: Controller B. string Numeric equivalents for controller values. • 0: B • 1: A string Controller ID and port number. string • FC: Fibre Channel. • iSCSI: Internet SCSI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 361
for configured-speed values. • 1: 2Gb • 2: 4Gb • 3: Auto • 7: 8Gb string • OK • Degraded • Fault • N/A string Numeric equivalents for health values. • 0: OK • 1: Degraded • 2: Fault • 4: N/A string More information about the health value. HP P2000 G3 MSA System CLI Reference Guide 361 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 362
="configured-speed-numeric" type="string">3 OK 0 Host port is OK ... ... Embedded basetypes • fc-port • iscsi-port - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 363
Loc:position-PSU, where the position is as viewed from the back of the enclosure. string FRU hardware revision level. string Power supply model. string Power supply vendor. string volt power supply, in 100th of a volt. string • OK • Degraded • Fault • N/A HP P2000 G3 MSA System CLI Reference Guide 363 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 364
Present • Unknown string Numeric equivalents for status values. • 0: Up • 1: Warning • 2: Error • 3: Not Present • 4: Unknown Example # show > Enclosure 0 - Left - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 365
-blame-numeric" type="string">0 ... Up 0 ... ... Embedded basetypes • unhealthy-component • fan HP P2000 G3 MSA System CLI Reference Guide 365 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 366
are active using ULP (Unified LUN Presentation). Data for volumes configured to use write-back cache is automatically mirrored between the two controllers to provide fault tolerance. • Single Controller: The enclosure contains a single controller. Numeric equivalents for redundancy-mode values - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 367
Operational 0 SN ... HP P2000 G3 MSA System CLI Reference Guide 367 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 368
0 1288967528 0 0 1288959835 0 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 369
> 0 0 0 0 0 ... HP P2000 G3 MSA System CLI Reference Guide 369 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 370
shown, this indicates that a problem is preventing half the available bandwidth from being used. • N/A: For a local primary or secondary volume. The address of each host port in the remote system through which the volume is accessible. Example # show replication-volumes ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 371
="rows"> A1 FC 6 B1,B2 ... HP P2000 G3 MSA System CLI Reference Guide 371 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 372
Info: The default value. Remote system vendor name. Remote system product model identifier. Remote system brand name. IP address of the network port in controller A in the remote system. IP address of the network port in controller B in the remote system. Name of a user that is configured in the - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 373
-numeric" type="string">2 2010-11-05 14:46:59 iSCSI 3 ... HP P2000 G3 MSA System CLI Reference Guide 373 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 374
#, where # starts at 001. • new-snapshot: Replicate a new snapshot of the volume to the remote system. This is the default. • last-snapshot: Replicate the last (most recent existing) snapshot of the volume to the remote system. • 0: new-snapshot • ?: last-snapshot Number of snapshots to retain with - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 375
The replication snapshot is associated with the replication volume specified in the request. Replication snapshot name created. Unformatted creation-date-time value. Example # show replication-images ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 376
is known to exist in the primary-view volume but replication has not started. • Replicating: The when the replication operation status was last updated. Unformatted update-time value. Date and time, in for the replication operation. Example # show replication-images ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 377
string">1288967476 2010-11-05 14:32:02 1288967522 N/A ... HP P2000 G3 MSA System CLI Reference Guide 377 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 378
name serial-number Type Description string Replication set name. string Replication set serial number. Example # show replication-sets ... rsvdTx_iscsi_r - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 379
volume monitoring status. • OK: Communication to the remote volume is successfully occurring on the network. • Failed: Communication to the remote volume has failed because of a communication issue or because the remote volume has gone offline. HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 380
. • 0: Local • 1: Remote string IP address of the network port in controller A in the remote system. string IP address of the network port in controller B in the remote system. string Primary volume name. string Primary volume serial number. string Primary volume status. • Online • Conflict - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 381
replication-volume" name="replication-volume" oid="1" format="rows"> vdRx_v001 SN Online HP P2000 G3 MSA System CLI Reference Guide 381 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 382
ip-address-a" type="string">10.134.101.50 10.134.101.51 0 iSCSI 64 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 383
" key="true" type="string">SN Primary Volume 1 ... Embedded basetypes • replication-image HP P2000 G3 MSA System CLI Reference Guide 383 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 384
snapshot-serial Type string string Description Name of the snapshot to reset. Serial number of the snapshot to reset. Example # show tasks ... vdRx_v001_s001 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 385
• Direct string Number of PHY lanes in the SAS port. Example # show ports ... Direct 4 ... HP P2000 G3 MSA System CLI Reference Guide 385 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 386
exist in the expander. • Drive: 1-lane PHY that communicates between the expander and a disk drive. • Ingress: (Expansion module only) 4-lane PHY that communicates between the expander and an expansion port. • Egress: 4-lane PHY that communicates between the expander and an expansion port or SAS Out - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 387
connector. • Firmware reboot • Drive removed: PHY disabled because drive slot is empty. • Unused - disabled by default: PHY is disabled by default because it is not used. • Excessive PHY changes: PHY is disabled because of excessive PHY change counts. HP P2000 G3 MSA System CLI Reference Guide 387 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 388
-reason values. • 0: (blank) • 32769: Error count interrupts • 32770: Externally disabled • 32771: PHY control • 32772: Not ready • 32773: Firmware reboot • 32774: Drive removed • 32775: Unused - disabled by default • 32776: Excessive PHY changes uint32 Number of times PHY status has changed. uint32 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 389
the task that the schedule runs. string Error message, or blank. Example # show schedules ... ... See also • tasks HP P2000 G3 MSA System CLI Reference Guide 389 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 390
. • Enabled: The secure SMU web server is enabled. This is the default. Numeric equivalents for wbi-https values. • 0: Disabled • 1: Enabled • Disabled: The standard CLI is disabled. • Enabled: The standard CLI is enabled. This is the default. Numeric equivalents for cli-telnet values. • 0: Disabled - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 391
default. string Numeric equivalents for inband-ses values. • 0: Disabled • 1: Enabled Example # show protocols ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 392
is initializing. This typically occurs during controller startup. • Unrecoverable: The enclosure management processor (EMP) cannot communicate with the sensor. • Unknown: The sensor is present but status is not available. • Not Installed: The sensor is not present. • Unsupported: Status detection is - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 393
> 00:031 1109 500c0ff0d8b6cb3c N/A HP P2000 G3 MSA System CLI Reference Guide 393 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 394
OK ... 394 XML API basetype properties - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 395
is shut down. Example # show shutdown-status ... A up ... HP P2000 G3 MSA System CLI Reference Guide 395 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 396
512-byte blocks. string Number of master volumes associated with this snap pool. string use, as in the case where its disks are not present. • Corrupt: The snap pool's data show snap-pools ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 397
• Nonzero: Unavailable string Shows N/A for Available status, or one of the following reasons for Unavailable status: • Snapshot not found • Snap pool not found • Master volume not found • Snapshot Unformatted uniquedata value in 512-byte blocks. HP P2000 G3 MSA System CLI Reference Guide 397 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 398
-copy snapshot. Snapshot that is being used to copy data from a source volume to a destination volume. • 0xc000: Replicating snapshot. Snapshot that is being replicated from a primary system to a secondary system. • 0xe000: Only sync point. The snapshot is the only sync point that is available on - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 399
# show snapshots ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 400
from 1 to 32. Name of the last snapshot created by the task, or blank. Example # show tasks ... vd01_v002 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 401
. Example # show tasks ... v1_R0003 SN ... HP P2000 G3 MSA System CLI Reference Guide 401 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 402
• 8: crit Trap host IP address. Trap host IP address. Trap host IP address. Community string for SNMP read-only access (not shown to Monitor users). The default is public. Community string for SNMP write access (not shown to Monitor users). The default is private. Example # show snmp-parameters - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 403
-month-day hour:minutes:seconds (UTC), when the command was issued. string Unformatted time-stamp value. Example # any-command ... ="time-stamp-numeric" type="string">1288974845 ... HP P2000 G3 MSA System CLI Reference Guide 403 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 404
is used for or how it's configured. The default is Uninitialized Info. Midplane serial number. Vendor name. Product model identifier. Product brand name. SCSI vendor name. SCSI product identifier. Number of enclosures in the storage system. • OK • Degraded • Fault • N/A Numeric equivalents for - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 405
health-blame-numeric" type="string">0 English (English) 208000c0ffd8b6cb ... ... Embedded basetypes • redundancy HP P2000 G3 MSA System CLI Reference Guide 405 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 406
Shows whether host profiles are enabled, which determines whether LUN 0 can be assigned to volume mappings. • true: Host profiles are enabled. • false: Host profiles are disabled. Number of host-interface ports in the controller enclosure. Number of disks that the system supports. Number of volumes - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 407
" type="uint32">0 1 Disabled 0 HP P2000 G3 MSA System CLI Reference Guide 407 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 408
10485760 ... 408 XML API basetype properties - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 409
string Task name. string Type of operation this task performs. • TakeSnapshot • ResetSnapshot • VolumeCopy • ReplicateVolume • EnableDSD • VerifyVolume • CreateName • ObtainMap • UnmapVolume • CreateVolume • RemapVolume • VerifyCreatedVolume HP P2000 G3 MSA System CLI Reference Guide 409 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 410
a VolumeCopy task, the serial number of the destination vdisk. Example # show tasks ... string">SN ... ... Embedded basetypes • replicate-volume-tasks • reset-snapshot-tasks • snap-tasks • snapshot-with-retention- - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 411
date-time-numeric" type="string">1289216888 0 Disabled 0.0.0.0 ... HP P2000 G3 MSA System CLI Reference Guide 411 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 412
type. • super-cap: Super-capacitor pack. • MC: Management Controller. • port: Host port. • controller: Controller module. • expansion module: Expansion module. • PSU: Power supply unit. • disk: Disk drive. • enclosure: Enclosure. • vdisk: Vdisk. Numeric equivalents for component-type values - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 413
-cache ... 0 0 ... HP P2000 G3 MSA System CLI Reference Guide 413 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 414
SMU). This is the default. • (blank): User cannot use this interface. string • x: User can use the command-line interface (CLI). • (blank): User cannot use this interface. This is the default is the default. Operating systems usually show volume size in base 2. Disk drives usually show size in - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 415
ends. Valid values are 120-43200 seconds (2-720 minutes). The default is 1800 seconds (30 minutes). uint16 User-interface refresh rate, which is 30 seconds. Example # show 30 ... HP P2000 G3 MSA System CLI Reference Guide 415 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 416
statistics were last reset or since the controller was restarted. Unformatted data-written value. Example # show vdisk-statistics ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 417
name="him-model" type="string">0 7 2 2 ... HP P2000 G3 MSA System CLI Reference Guide 417 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 418
controller when the preferred owner is offline. • A: Controller A. • B: Controller B. Numeric equivalents for owner values. • 0: B • 1: A Controller that owns the vdisk and its volumes during normal operation. • A: Controller A. • B: Controller of disks in the vdisk. Number of spare disks assigned - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 419
units. string Unformatted min-drive-size value in 512-byte blocks. string Date and time, in the format year-month-day hour:minutes:seconds (UTC), when the vdisk was created. string Unformatted create-date value. string Not used. string Not used. HP P2000 G3 MSA System CLI Reference Guide 419 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 420
or since the controller was restarted. uint32 Total sectors read. uint32 Total sectors written. string Same as current-job. string Job running on the vdisk, if any. • (blank): No job is running. • DRSC: Disks in the vdisk are being scrubbed. • EXPD: Vdisk is being expanded. • INIT: Vdisk is - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 421
512-byte blocks. string • OK • Degraded • Fault • Unknown • N/A string Numeric equivalents for health values. • 0: OK • 1: Degraded • 2: Fault • 3: Unknown • 4: N/A string More information about the health value. HP P2000 G3 MSA System CLI Reference Guide 421 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 422
component has a problem. • child: A subcomponent has a problem. • both: Both this component and at least one subcomponent have a problem. string Numeric value is set, the default is 15 minutes. Example # show vdisks ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 423
name="disk-dsd-enable-vdisk" type="string">Disabled 0 0 ... Embedded basetypes • unhealthy-component HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 424
the status value. Example # show volumecopy-status ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 425
type="string">SN vd01_v002_01 preserved ... HP P2000 G3 MSA System CLI Reference Guide 425 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 426
-names Properties Table 86 volume-names properties Name volume-name serial-number Type Description string Volume name. string Volume serial number. Example # show volume-names ... - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 427
performance of write operations and throughput. This is the default. • write-through: Write-through caching significantly impacts performance by waiting for data to be completely written to disk before signaling the host standard • 1: super-sequential HP P2000 G3 MSA System CLI Reference Guide 427 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 428
volumequalifier string The volume's read-ahead cache setting. • Disabled: Read-ahead caching is disabled. • Default: One chunk for the first access in a sequential read and one stripe for all subsequent accesses. • Maximum: Maximum read-ahead size calculated by the controller. • 64 KB, 128 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 429
name="volume-qualifier" type="string">N/A 0 3899392 HP P2000 G3 MSA System CLI Reference Guide 429 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 430
-set" type="string"> SN 0% - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 431
from cache to disk is not a full stripe. Number of times flush from cache to disk is a full stripe. Number of read pre-fetch or anticipatory-read operations. Cache size used on behalf of this volume. Percentage of cache used on behalf of this volume. HP P2000 G3 MSA System CLI Reference Guide 431 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 432
Example # show volume-statistics ... vdisk_R10a_V1 SN - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 433
="volume-view" name="volume-view" oid="1" format="labeled"> SN vd01_v001 ... Embedded basetypes • volume-view-mappings HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 434
to the volume. This is the default. • read-only: The host has read access to the volume. • no-access: The host is denied access to the volume. • not-mapped: The host is not mapped to the volume. string • For an FC or SAS host port, the host WWPN. • For an iSCSI host port, the host initiator node - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 435
• Timeout: 30 minutes 30 minutes (preserved)1 (preserved)2 (preserved)3 (preserved) (preserved)4 If addressing mode is Manual, IP values are preserved. If addressing mode is DHCP, IP values are released.5 • Disabled • none • 0.0.0.0 • public • private HP P2000 G3 MSA System CLI Reference Guide 435 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 436
Native Command Queuing (NCQ) Enabled 1. Factory default: no tasks or schedules. 2. Factory default: no remote system definitions. 3. Factory default: MC logs are cleared. 4. Factory default: NTP is disabled; NTP host IP address is 0.0.0.0; NTP offset is 0. 5. Factory default: IP addresses are - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 437
. Fibre Channel Arbitrated Loop (FC-AL) topology. Volume-mapping settings that specify no access to that volume by hosts. See also default mapping and explicit mapping. A volume that is enabled for snapshots and has an associated snap pool. HP P2000 G3 MSA System CLI Reference Guide 437 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 438
block-level data from a volume in a primary system to a volume in one or more secondary systems by creating a replication snapshot of the primary volume and copying the snapshot data to the secondary systems via Fibre Channel or iSCSI links. The capability to perform remote replication is a licensed - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 439
unique 64-bit number that identifies a node process or node port. WWNN World Wide Node Name. A globally unique 64-bit number that identifies a node process. WWPN World Wide Port Name. A globally unique 64-bit number that identifies a node port. HP P2000 G3 MSA System CLI Reference Guide 439 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 440
440 Glossary - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 441
scheduled task 26 service utilities 26 snapshot 25 statistics 27 system configuration and utilities 26 volume copy 26 volume, host, and mapping 25 CompactFlash card status show 174 CompactFlash failure trigger enable/disable 119, 122 show setting 170 HP P2000 G3 MSA System CLI Reference Guide 441 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 442
exit the CLI 89 expander clear status and counters 40 enable/disable PHY fault isolation 135 show status 196 explicit mapping 94 F failover status and reason show controller 181 fan failure trigger enable/disable 120, 122 show setting 171 field-replaceable unit See FRUs firmware show versions 284 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 443
120 show maximum number of 248 show setting for response to missing 170 M MAC address, controller 215 Management Controllers restart 114 management-interface access set user 59, 166 show user 261 masked volume 94 master volume expand 92 roll back data 117 HP P2000 G3 MSA System CLI Reference Guide - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 444
show 170 N NCQ default 436 network ports set gateway IP address 145 set IP address 145 set IP subnet mask 145 Network Time Protocol See NTP NTP configure 129, 147 show settings 217 O optional parameters 21 out-of-band interfaces enable/disable 151 output format API 15 console 15 set CLI 127 show CLI - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 445
failure trigger enable/disable 120, 122 show setting 170 synchronize-cache mode set 120 show setting 170 syntax, command 21 system restart 114 restore defaults 115, 435 set contact 163 set information/description 163 set location 163 set name 163 HP P2000 G3 MSA System CLI Reference Guide 445 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 446
show 262 show background scrub setting 210 show maximum number of 248 show maximum number per controller 248 show performance statistics 264 start manual scrub 118 verification abort 32 versions show hardware and firmware 284 virtual disk name 22 serial number 22 voltages show component 239 volume - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 447
17 basetype list 97 DTD content and version 18 enable/disable brief format 127 enable/disable output 127 examples 20 optimization 20 scripting guidelines 19 show data omitted by brief mode 97 using 18 HP P2000 G3 MSA System CLI Reference Guide 447 - HP P2000 | HP P2000 G3 MSA System CLI Reference Guide - Page 448
448 Index
HP P2000 G3 MSA System
CLI Reference Guide
Part number: 500912-006
First edition: May 2011