HP P2000 HP P2000 G3 MSA System CLI Reference Guide - Page 217
show ntp-status, NTP Status, activated, NTP Server Address, Last Server Contact
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
show ntp-status Description Shows the status of the use of Network Time Protocol (NTP) in the system. Syntax show ntp-status Output NTP Status • activated: NTP is enabled • deactivated: NTP is disabled NTP Server Address NTP server IP address, or 0.0.0.0 if not set Last Server Contact Date and time, in the format year-month-day hour:minutes:seconds (UTC), of the last message received from the NTP server; or none Example Show NTP status for the system: # show ntp-status NTP Status ---------NTP Status: activated NTP Server Address: 69.10.36.3 Last Server Contact: 2009-12-04 16:24:42 Basetypes • ntp-status • status See also • set controller-date HP P2000 G3 MSA System CLI Reference Guide 217
HP P2000 G3 MSA System CLI Reference Guide
217
show ntp-status
Description
Shows the status of the use of Network Time Protocol (NTP) in the system.
Syntax
show ntp-status
Output
NTP Status
•
activated
: NTP is enabled
•
deactivated
: NTP is disabled
NTP Server Address
NTP server IP address, or 0.0.0.0 if not set
Last Server Contact
Date and time, in the format
year-month-day hour
:
minutes
:
seconds
(UTC), of the last
message received from the NTP server; or none
Example
Show NTP status for the system:
# show ntp-status
NTP Status
----------
NTP Status: activated
NTP Server Address: 69.10.36.3
Last Server Contact: 2009-12-04 16:24:42
Basetypes
•
ntp-status
•
status
See also
•
set controller-date