HP P2000 HP P2000 G3 MSA System CLI Reference Guide - Page 201

show host-maps Description Shows mapping information for volumes that are mapped to all hosts or to a specified host. Syntax show host-maps [host] Parameters host Optional. Specifies the host's nickname or ID. If this parameter is omitted, mapping information for all hosts is shown Output ID • For FC and SAS: Host WWPN. • For iSCSI: iSCSI host initiator's node name (typically the IQN). Name Host port nickname. Profile • Standard: The host allows LUN 0 to be assigned to a mapping. • OpenVMS: The host does not allow LUN 0 to be assigned to a mapping. • HP-UX: The host allows LUN 0 to be assigned to a mapping and uses Flat Space Addressing. Name Name of the volume seen by the host. Serial Number Serial number of the volume seen by the host. LUN LUN used to access the volume. Access Type of host access to the volume: • read-write: Read and write • read-only: Read only • no-access: No access Ports Controller host ports that the mapping applies to. HP P2000 G3 MSA System CLI Reference Guide 201