HP P2000 HP P2000 G3 MSA System CLI Reference Guide - Page 61
create vdisk - g3 msa best practices
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
create vdisk Description Creates a vdisk using the specified RAID level, disks, and spares. All disks used in a vdisk and its spares must be either SAS or SATA; mixing disk types is not supported. For each RAID level, the minimum and maximum numbers of disks supported are: • NRAID: 1 • RAID 0: 2-16 • RAID 1: 2 • RAID 3: 3-16 • RAID 5: 3-16 • RAID 6: 4-16 • RAID 10: 4-16 • RAID 50: 6-32 For best practices for creating vdisks, see the SMU reference guide. Syntax create vdisk level nraid|raid0|r0|raid1|r1|raid3|r3|raid5|r5|raid6|r6|raid10|r10 |raid50|r50 disks disks [assigned-to a|b|auto] [spare disks] [chunk-size 16k|32k|64k] [mode online|offline] name Parameters level nraid|raid0|r0|raid1|r1|raid3|r3|raid5|r5|raid6|r6|raid10|r10 |raid50|r50 Specifies the RAID level. disks disks IDs of the disks to include in the vdisk. RAID 10 requires a minimum of two RAID-1 sub-vdisks each having two disks. RAID 50 requires a minimum of two RAID-5 sub-vdisks each having three disks. For disk syntax, see Command syntax on page 21. assigned-to a|b|auto Optional. For a system operating in Active-Active ULP mode, this specifies the controller to own the vdisk. To let the system automatically load-balance vdisks between controllers, use auto or omit this parameter. In Single Controller mode, this parameter is ignored; the system automatically load-balances vdisks in anticipation of the insertion of a second controller in the future. spare disks Optional. IDs of 1-4 dedicated spares to assign to a RAID 1, 3, 5, 6, 10, or 50 vdisk. For disk syntax, see Command syntax on page 21. chunk-size 16k|32k|64k Optional. The amount of contiguous data, in KB, that is written to a vdisk member before moving to the next member of the vdisk. For RAID 50, this option sets the chunk size of each RAID-5 subvdisk. The chunk size of the RAID-50 vdisk is calculated as: configured-chunk-size x (subvdisk-members - 1). For NRAID and RAID 1, chunk-size has no meaning and is therefore not applicable. The default and maximum size is 64k. mode online|offline Optional. Specifies whether the vdisk is initialized online or offline. • online: Enables you to use the vdisk immediately after creating it while it is initializing. Because online uses the verify method to create the vdisk, it takes longer to complete initializing than offline. Online initialization is fault-tolerant. This option is the default. • offline: You must wait for the vdisk initialization process to finish before using the vdisk; however, offline takes less time to complete initializing than online. HP P2000 G3 MSA System CLI Reference Guide 61