HP P3410A HP NetRAID Series User Guide - Page 107

Option: Experienced users may press <Ctrl> <M> for, HP NetRAID Express Tools now.,

Get HP P3410A - NetRAID 1M RAID Controller PDF manuals and user guides
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

Chapter 5 Reconstructing and Rebuilding Drives 2. Restart the HP NetServer. Look for the following prompt during startup: Option: Experienced users may press for HP NetRAID Express Tools now. Firmware Initializing 3. Press . When the system stops scanning, HP NetRAID Express Tools starts. 4. Choose Objects from the Tools Management menu. 5. Choose Adapter from the Objects menu. 6. If you have more than one adapter, select the adapter for which you want to change the PFS setting. 7. Choose Power Fail Safeguard from the Adapter menu. 8. If you want to change the PFS setting on another adapter, press Esc to return to the Objects menu. Then repeat Steps 4 through 7 for that adapter. 9. When you have changed the PFS settings on all adapters, press Esc repeatedly to return to the Tools Management menu. 10. To exit HP NetRAID Express Tools, press Esc at the Tools Management menu. Choose Yes at the prompt. You must then restart the HP NetServer. Using HP NetRAID Config to Change the PFS Setting To change the PFS setting by using the HP NetRAID Config utility: 1. Start HP NetRAID Config by using the command appropriate for your network operating system. 2. Choose Objects from the Management menu. 3. Choose Adapter from the Objects menu. 4. If you have more than one adapter, select the adapter for which you want to change the PFS setting. 5. Choose PowerFail Safeguard from the Adapter menu. 6. If you want to change the PFS setting on another adapter, press Esc to return to the Objects menu. Then repeat Steps 3 through 5 for that adapter. 7. When you have changed the PFS settings on all adapters, press Esc repeatedly to return to the Management menu. You do not need to restart the server for this parameter to take effect. 101

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
Chapter 5
Reconstructing and Rebuilding Drives
101
2.
Restart the HP NetServer. Look for the following prompt during startup:
Option: Experienced users may press <Ctrl> <M> for
HP NetRAID Express Tools now.
Firmware Initializing
3.
Press <
Ctrl
> <
M
>. When the system stops scanning, HP NetRAID
Express Tools starts.
4.
Choose
Objects
from the Tools Management menu.
5.
Choose
Adapter
from the Objects menu.
6.
If you have more than one adapter, select the adapter for which you want to
change the PFS setting.
7.
Choose
Power Fail Safeguard
from the Adapter menu.
8.
If you want to change the PFS setting on another adapter, press
Esc
to
return to the Objects menu. Then repeat Steps 4 through 7 for that adapter.
9.
When you have changed the PFS settings on all adapters, press
Esc
repeatedly to return to the Tools Management menu.
10.
To exit HP NetRAID Express Tools, press
Esc
at the Tools Management
menu. Choose
Yes
at the prompt. You must then restart the HP NetServer.
Using HP NetRAID Config to Change the PFS Setting
To change the PFS setting by using the HP NetRAID Config utility:
1.
Start HP NetRAID Config by using the command appropriate for your
network operating system.
2.
Choose
Objects
from the Management menu.
3.
Choose
Adapter
from the Objects menu.
4.
If you have more than one adapter, select the adapter for which you want to
change the PFS setting.
5.
Choose
PowerFail Safeguard
from the Adapter menu.
6.
If you want to change the PFS setting on another adapter, press
Esc
to
return to the Objects menu. Then repeat Steps 3 through 5 for that adapter.
7.
When you have changed the PFS settings on all adapters, press
Esc
repeatedly to return to the Management menu. You do not need to restart
the server for this parameter to take effect.