HP P3410A HP NetRAID Series User Guide - Page 110

Rebuilding Drives Manually

Get HP P3410A - NetRAID 1M RAID Controller PDF manuals and user guides
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

Chapter 5 Reconstructing and Rebuilding Drives You can view or change the Rebuild Rate from any of the three HP NetRAID utilities. To view or change the Rebuild Rate from HP NetRAID Express Tools: 1. If you have more than one adapter, choose Select Adapter from the Tools Management menu, and then select the adapter for which you want to change or view the Rebuild Rate. 2. Choose Objects from the HP NetRAID Express Tools Management menu. 3. Choose Adapter from the Objects menu. 4. Select View/Update Rebuild Rate. 5. Use the arrow keys to increase or decrease the amount of processor time dedicated to rebuilding the failed disk. 6. If you want to change the Rebuild Rate on another adapter, press Esc to return to the Tools Management menu. Then repeat Steps 1 through 5 for that adapter. 7. When you have changed the Rebuild Rate on all adapters, press Esc repeatedly to back up to the Tools Management menu. To view or change the Rebuild Rate from HP NetRAID Assistant: 1. If you have more than one adapter, click on the Adapter box and choose the adapter from the pull-down list. 2. Choose Adapter from the HP NetRAID Assistant Management menu. 3. Choose Rebuild Rate from the Adapter menu. To view or change the Rebuild Rate from HP NetRAID Config: 1. Choose Adapter from the HP NetRAID Config Management menu. 2. Choose View/Update Parameters from the Adapter menu. Rebuilding Drives Manually You must initiate a manual rebuild under any of several conditions: • Autorebuild was disabled. • The hot spare or replacement drive does not have enough capacity to rebuild the failed drive. 104

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
Chapter 5
Reconstructing and Rebuilding Drives
104
You can view or change the Rebuild Rate from any of the three HP NetRAID
utilities.
To view or change the Rebuild Rate from HP NetRAID Express Tools:
1.
If you have more than one adapter, choose
Select Adapter
from the Tools
Management menu, and then select the adapter for which you want to
change or view the Rebuild Rate.
2.
Choose
Objects
from the HP NetRAID Express Tools Management menu.
3.
Choose
Adapter
from the Objects menu.
4.
Select
View/Update Rebuild Rate
.
5.
Use the arrow keys to increase or decrease the amount of processor time
dedicated to rebuilding the failed disk.
6.
If you want to change the Rebuild Rate on another adapter, press
Esc
to
return to the Tools Management menu. Then repeat Steps 1 through 5 for
that adapter.
7.
When you have changed the Rebuild Rate on all adapters, press
Esc
repeatedly to back up to the Tools Management menu.
To view or change the Rebuild Rate from HP NetRAID Assistant:
1.
If you have more than one adapter, click on the Adapter box and choose
the adapter from the pull-down list.
2.
Choose
Adapter
from the HP NetRAID Assistant Management menu.
3.
Choose
Rebuild Rate
from the Adapter menu.
To view or change the Rebuild Rate from HP NetRAID Config:
1.
Choose
Adapter
from the HP NetRAID Config Management menu.
2.
Choose
View/Update Parameters
from the Adapter menu.
Rebuilding Drives Manually
You must initiate a manual rebuild under any of several conditions:
•
Autorebuild was disabled.
•
The hot spare or replacement drive does not have enough capacity to
rebuild the failed drive.