HP P3410A HP NetRAID Series User Guide - Page 36
Define Physical Arrays and Dedicated Hot Spares
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2 HP NetRAID Assistant ∗ If an array contains two drives, and you checked Redundancy, the logical drive is assigned RAID level 1. ∗ If an array contains three to five drives, and you checked Redundancy, the logical drive is assigned RAID level 5. ∗ If an array contains only one drive, the logical drive is assigned RAID level 0. (No redundancy is possible on a logical drive containing just one physical drive.) ∗ Automatic configuration does not create hot spares. 4. Click the Next button. 5. If you chose Automatic mode, skip to "Preview Configuration" later in this section. Define Physical Arrays and Dedicated Hot Spares The HP NetRAID Assistant Wizard Array Definition window appears, displaying the Physical Devices and Logical Devices configured on your system. A sample is shown in Figure 2-5. The "new array" in the Logical Devices box shows where a new array can be defined. Figure 2-5. HP NetRAID Assistant Wizard Array Definition Window 30