HP P3410A HP NetRAID Series User Guide - Page 7

Introduction The HP NetRAID-1Si and HP NetRAID-3Si adapters and the integrated HP NetRAID controllers built into certain HP NetServers let you link multiple hard disk drives together to write data across them as if they were one large drive You configure your linked drives in a RAID (redundant array of independent disks) subsystem. Initial installation and configuration of HP NetRAID Series adapters is described in the HP NetRAID Series Installation and Configuration Guide. Initial configuration of the integrated HP NetRAID controller is described in the HP NetServer Integrated NetRAID Controller Configuration Guide. This HP NetRAID Series User Guide contains information on the HP NetRAID utilities that let you manage and make changes to an existing RAID system. This guide covers the following topics: • Overview of HP NetRAID Utilities • HP NetRAID Assistant (for Windows NT and Windows 2000) • HP NetRAID Config (for Novell NetWare, IBM OS/2, and SCO OpenServer and UnixWare) • HP NetRAID Express Tools (use with all supported network operating systems) • Reconstructing and Rebuilding Drives • Capacity Expansion • Monitor Alert List • Alarm Control and Audible Warnings • Glossary 1