HP P3410A HP NetRAID Series User Guide - Page 61
Battery Backup HP NetRAID-3Si Adapters and Optional for Integrated HP NetRAID, in HP NetServer LH
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 3 HP NetRAID Config eight bits. This setting is required if the selected SCSI channel is terminated with 8-bit devices at both ends. • Terminate Wide Channel: Enables Wide termination for the selected channel. This is required if the HP NetRAID Series adapter is at one end of the SCSI bus for the selected channel. The default setting is Wide Termination. • Disable Termination: Disables termination on the adapter for the selected channel. This option should be used if the selected SCSI channel is terminated with Wide devices at both ends. • View Parameters: Displays the termination and active status of the selected channel. Battery Backup (HP NetRAID-3Si Adapters and Optional for Integrated HP NetRAID in HP NetServer LH 3000/3000r, LH 6000/6000r, and LT 6000r Only) View the Battery Backup properties from this option. The properties of your Battery Backup Unit (in HP NetRAID-3Si) or Battery Backup Module (optional for integrated HP NetRAID in HP NetServer LH 3000/3000r, LH 6000/6000r, and LT 6000r) should be identical or similar to the following properties: • Battery Card Present • Battery Pack Present • Temperature Good • Voltage Good • Fast Charging Completed • Charge Counter 1 ◊ Reset Charge Count Cycles ∗ Yes ∗ No This menu item produces an error message (missing battery) if accessed with the HP NetRAID-1Si adapter or with an integrated HP NetRAID controller without battery backup. Disregard the message for these cases. 55