HP P3410A HP NetRAID Series User Guide - Page 66
Using Easy Configuration
UPC - 725184582783
View all HP P3410A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 3 HP NetRAID Config You can change the write policy, read policy, and cache policy after the configuration is complete. Choose Objects, then Logical Drive, then Properties to change this information. User Actions Perform the following steps when using Auto Configuration. 1. Choose Configure from the HP NetRAID Config Management menu. 2. Designate hot spares if desired by using the Easy Configuration selection. (Auto Configuration does not create any hot spares.) 3. Choose Auto Configuration from the Configure menu and respond to the confirmation prompt. The logical drives that result from Auto Configuration are displayed with a save prompt. Choose Yes to save the configuration. 4. Initialize the logical drives you have just configured. See "Initializing Logical Drives" in this chapter for more information. Using Easy Configuration Easy Configuration does not permit you to create spanned arrays; however, you can create more than one logical drive per array. Follow the steps below to create arrays by using Easy Configuration. 1. Choose Configure from the HP NetRAID Config Management menu. 2. Choose Easy Configuration from the Configure menu. The array selection menu appears. The hot key information appears at the bottom of the window. The hot key functions are: Space Select or deselect the highlighted drive. Enter Stop adding drives to the current array, and configure the logical drive. F2 Display drive information for the highlighted drive. F3 Display the logical drives that have been configured. F4 Designate the highlighted drive as a hot spare. 3. Press the arrow keys to highlight specific physical drives. 4. Press F4 to configure a highlighted drive as a hot spare. 60