HP Pavilion 13-u100 Maintenance and Service Guide - Page 70
Display assembly, Phillips PM2.5×4.2 screws
View all HP Pavilion 13-u100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 34), and then remove the following components: a. Battery (see Battery on page 42). b. USB port shield (see USB port shield on page 50). c. System board (see System board on page 51). Remove the display assembly: 1. Remove the five Phillips PM2.5×4.2 screws (1) that secure the display assembly to the base enclosure. 2. Release the display assembly (2) by sliding it forward. 3. Remove the display assembly (3). 4. If it is necessary to replace the display panel assembly: NOTE: The display panel assembly spare part kit includes the display bezel, display panel, display panel cable, and the TouchScreen board. 62 Chapter 5 Removal and replacement procedures for authorized service provider parts