HP Pavilion Aero 13.3 Maintenance and Service Guide - Page 37

5 Removal and replacement procedures for authorized service provider parts This chapter provides removal and replacement procedures for authorized service provider parts. IMPORTANT: Components described in this chapter should be accessed only by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are on the service tag at the bottom of your computer. Component replacement procedures To remove and replace computer components, use these procedures. NOTE: HP continually improves and changes product parts. For complete and current information about supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. You must remove, replace, or loosen as many as 39 screws when you service the parts described in this chapter. Make special note of each screw size and location during removal and replacement. Preparation for disassembly To remove and replace computer components, use these procedures. See Removal and replacement procedures preliminary requirements on page 21 for initial safety procedures. 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Bottom cover To remove the bottom cover and rubber feet, use this procedure and illustration. Table 5-1 Bottom cover and rubber feet descriptions and part numbers Description Bottom cover, natural silver Bottom cover, ceramic white Bottom cover, pale rose gold Bottom cover, warm gold Rubber feet, gray Spare part number M52805-001 M52806-001 M52807-001 M52808-001 M52818-001 29