HP Pavilion Aero 13.3 Maintenance and Service Guide - Page 46

Heat sink, Remove the heat sink

Get HP Pavilion Aero 13.3 PDF manuals and user guides View all HP Pavilion Aero 13.3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Heat sink To remove the heat sink, use this procedure and illustration. Table 5-8 Heat sink descriptions and part numbers Description Heat sink Spare part number M52815-001 Before removing the heat sink, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 29). 3. Disconnect the battery cable from the system board (see Battery on page 31). Remove the heat sink: 1. Remove the foam pad from the system board (1). 2. In the order indicated on the heat sink, remove the four Phillips M2.0 × 4.0 screws (2) that secure the heat sink to the system board. 3. Remove the heat sink (3). 38 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Heat sink
To remove the heat sink, use this procedure and illustration.
Table 5-8
Heat sink descriptions and part numbers
Description
Spare part number
Heat sink
M52815-001
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
29
).
2.
Remove the bottom cover (see
Bottom cover
on page
29
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
31
).
Remove the heat sink:
1.
Remove the foam pad from the system board
(1)
.
2.
In the order indicated on the heat sink, remove the four Phillips M2.0 × 4.0 screws
(2)
that secure the
heat sink to the system board.
3.
Remove the heat sink
(3)
.
38
Chapter 5
Removal and replacement procedures for authorized service provider parts