HP Pavilion Aero 13.3 Maintenance and Service Guide - Page 52
Power connector cable, Remove the power connector cable
View all HP Pavilion Aero 13.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3. Remove the system board from the computer (2). Reverse this procedure to install the system board. Power connector cable To remove the power connector cable, use this procedure and illustration. Table 5-13 Power connector cable description and part number Description Power connector cable Spare part number M45022-001 Before removing the power connector cable, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 29). 3. Disconnect the battery cable from the system board (see Battery on page 31). Remove the power connector cable: 1. Remove the two Phillips M2.5 × 5.0 screws (1) from the right hinge. 2. Rotate the hinge off the power connector (2). 3. Disconnect the power connector cable from the system board (3). 44 Chapter 5 Removal and replacement procedures for authorized service provider parts