HP Pavilion Aero 13.3 Maintenance and Service Guide - Page 45
Fingerprint reader, Fan, Remove the Phillips M2.0 × 2.0 screw
View all HP Pavilion Aero 13.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Fingerprint reader To remove the fingerprint reader, use this procedure and illustration. Table 5-7 Fingerprint reader description and part number Description Fingerprint reader, natural silver Fingerprint reader, ceramic white Fingerprint reader, pale rose gold Fingerprint reader, warm gold Fingerprint reader cable Spare part number M52794-001 M52795-001 M52796-001 M52797-001 M52810-001 Before removing the fingerprint reader, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 29). 3. Remove the battery (see Battery on page 31). 4. Remove the fan (see Fan on page 37). 5. Remove the system board (see System board on page 42). Remove the fingerprint reader: 1. Disconnect the fingerprint reader cable to the system board (1). 2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the fingerprint reader bracket to the computer. 3. Remove the bracket from on top of the fingerprint reader (3). 4. Remove the fingerprint reader from the computer (4). Fan Reverse this procedure to install the fingerprint reader. To remove the fan, use this procedure and illustration. Component replacement procedures 37