HP Pavilion Aero 13.3 Maintenance and Service Guide - Page 40
Solid-state drive, Remove the Phillips M2.0 × 2.5 screw
View all HP Pavilion Aero 13.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4. Remove the battery from the computer (4). To replace the battery, reverse the removal procedures. Solid-state drive To remove the solid-state drive, use this procedure and illustration. Table 5-3 Solid-state drive descriptions and part numbers Description 1 TB, PCIe 512 GB, PCIe 256 GB, PCIe Spare part number L85370-005 L85364-005 L85354-005 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 29). 3. Disconnect the battery cable from the system board (see Battery on page 31). Remove the solid-state drive: 1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the cover over the solid-state drive, and then remove the cover (2). 32 Chapter 5 Removal and replacement procedures for authorized service provider parts