HP Pavilion Aero 13.3 Maintenance and Service Guide - Page 47
Light bar, Before removing the light bar, follow these steps
View all HP Pavilion Aero 13.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. Thoroughly clean the thermal material from the surface of the heat sink (1) and the system board component (2) each time the heat sink is removed. Replacement thermal material is included with the heat sink and system board spare part kits. Reverse this procedure to install the heat sink. Light bar To remove the light bar, use this procedure and illustration. Table 5-9 Light bar description and part number Description Light bar Spare part number M52695-001 Before removing the light bar, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 29). 3. Remove the battery (see Battery on page 31). Remove the light bar: 1. Disconnect the cable from the ZIF connector on the light bar (1). Component replacement procedures 39