HP Pavilion Elite e9100 Upgrade and Service - Page 22
IMPORTANT, the center of each plug, and then pull
View all HP Pavilion Elite e9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
16 Lift the cage partway out of the computer. For plugs with a latch, press the latch (1 or 3) in the center of each plug, and then pull the plug (2 or 4) from the connector. 17 Disconnect the cables from the hard disk drive in the cage: IMPORTANT: Recording the plug locations when there are multiple drives helps ensure you correctly replace the connections. The plugs on the cables are keyed and can be inserted only when aligned properly with the connector on the drive. In addition, some plugs have a latch that must be pressed or squeezed to release the plug while pulling it from the connector. For plugs without a latch, pull the plug straight out from the connector. 13 4 2 18 Remove the four screws (two on each side) that secure the drive in the cage. MASTER SLAVE To CPU 6 537502-001 - Removing and Replacing a Hard Disk Drive