HP ProBook 4520s HP ProBook 4520s Notebook PC and HP ProBook 4720s Notebook PC - Page 114
USB connector assembly
View all HP ProBook 4520s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
8. Remove the screw (1) that secures the USB to the computer, disconnect the cable (2) from the system board and then, remove the device (3) from the computer. Reverse this procedure to install the system board. USB connector assembly NOTE: The USB connector assembly is included in the Cable Kit, spare part number 603188-001 for computers with 17.3-in displays and in 599807-001 for computers with 15.6-in displays. Before removing the USB connector assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 50). 5. Remove the switch cover and keyboard (see Switch cover and keyboard on page 51). 6. Remove the optical drive (see Optical drive on page 56). 7. Remove the power button board cable (see Power button board on page 58). 8. Remove the speakers (see Speakers on page 60). 106 Chapter 4 Removal and replacement procedures