HP ProBook 4520s HP ProBook 4520s Notebook PC and HP ProBook 4720s Notebook PC - Page 60
Two PM2.5×2.5 screws, and then remove it from the computer
View all HP ProBook 4520s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2. To remove the switch cover, remove the following: (1) Two screw covers on the rear edge of the computer (2) Two PM2.5×2.5 screws (3) Three PM2.0×2.5 broadhead screws located in the battery bay 3. Open the computer as far as possible. 4. Slide the switch cover back (1), and then remove it from the computer (2). 52 Chapter 4 Removal and replacement procedures
2.
To remove the switch cover, remove the following:
(1)
Two screw covers on the rear edge of the computer
(2)
Two PM2.5×2.5 screws
(3)
Three PM2.0×2.5 broadhead screws located in the battery bay
3.
Open the computer as far as possible.
4.
Slide the switch cover back
(1)
, and then remove it from the computer
(2)
.
52
Chapter 4
Removal and replacement procedures