HP ProBook 4520s HP ProBook 4520s Notebook PC and HP ProBook 4720s Notebook PC - Page 95
Open the computer as far as possible
View all HP ProBook 4520s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
6. Disconnect the power button cable from the system board (see Power button board on page 58). 7. Remove the speakers (see Speakers on page 60) 8. Remove the thermal shield (see Thermal shield on page 62). Remove the display cables: 1. Remove the tape that holds the cables in place(1). Disconnect the display and webcam cables from the system board and from the routing channels. 2. Disconnect the cable connectors for the display (2) and microphone (3) from the system board. 3. Disconnect the WLAN and WWAN cables (4) from the tape and from the routing channels built into the top cover. Remove the display assembly: 1. Position the computer right-side up with the front toward you. 2. Open the computer as far as possible. CAUTION: Support the display assembly when removing the retaining screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 3. Remove the six Torx M2.5×6.0 screws (1) that secure the display assembly to the computer. Component replacement procedures 87