HP ProLiant 4500 Compaq ProLiant 4500 Servers Maintenance and Service Guide - Page 54
Table 3-13, Tape Drive Test Error Codes
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Diagnostic Tools 3-21 Error Code 1900-xx 1901-xx 1902-xx 1903-xx 1904-xx 1905-xx 1906-xx Table 3-13 Tape Drive Test Error Codes Description Tape ID failed Tape servo write failed Tape format failed Tape drive sensor test failed Tape BOT/EOT test failed Tape read test failed Tape write/read/compare test failed Recommended Action The following steps apply to error codes 1900-xx through 1906-xx: 1. Replace the tape cartridge and re-test. 2. Check and/or replace the signal cable and re-test. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if applicable) and re-test. 5. Replace the tape drive and re-test. 6. Replace the system board and re-test. Maintenance and Service Guide
Diagnostic Tools
3-21
Maintenance and Service Guide
Table 3-13
Tape Drive Test Error Codes
Error
Code
Description
Recommended Action
1900-xx
1901-xx
1902-xx
1903-xx
1904-xx
1905-xx
1906-xx
Tape ID failed
Tape servo write failed
Tape format failed
Tape drive sensor test failed
Tape BOT/EOT test failed
Tape read test failed
Tape write/read/compare test failed
The following steps apply to error
codes 1900-xx through 1906-xx:
1.
Replace the tape cartridge
and re-test.
2.
Check and/or replace the signal
cable and re-test.
3.
Check the switch settings on the
adapter board (if applicable).
4.
Replace the tape adapter board
(if applicable) and re-test.
5.
Replace the tape drive
and re-test.
6.
Replace the system board
and re-test.