HP ProLiant 4500 Compaq ProLiant 4500 Servers Maintenance and Service Guide - Page 56
Table 3-14, Advanced VGA Board Test Error Codes, Table 3-15, NetFlex-2 ENET-TR Controller and,
View all HP ProLiant 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Diagnostic Tools 3-23 Table 3-14 Advanced VGA Board Test Error Codes Continued Error Code Description Recommended Action 2458-xx 2468-xx 2477-xx 2480-xx Advanced VGA Bit BLT Test Advanced VGA DAC Test Advanced VGA Data Path Test Advanced VGA DAC Test The following steps apply to error codes 2458-xx through 2480-xx: 1. Run Setup. 2. Replace the system board and re-test. Error Code 6000-xx 6001-xx 6002-xx 6014-xx 6016-xx 6028-xx 6029-xx 6089-xx Table 3-15 NetFlex-2 ENET-TR Controller and NetFlex-2 Token Ring Controller Test Error Codes Description Network card ID failed Network card setup failed Network card transmit failed Network card Configuration failed Network card Reset failed Network card Internal failed Network card External failed Network card Open failed Recommended Action The following steps apply to error codes 6000-xx through 6089-xx: 1. Check the controller installation in the EISA slot. 2. Check the interrupt type and number setting. 3. Check the media connection at the controller and MAU*. 4. Check the media speed (4/16 ) and type (UTP/STP**) settings. 5. Check the MAU, cabling, or other network components. 6. Replace the controller. * MAU = Multistation Access Unit ** UTP/STP = Unshielded Twisted Pair/Shielded Twisted Pair. Maintenance and Service Guide