HP ProLiant DL380p HP ProLiant DL380p Gen8 Server User Guide - Page 11
Systems Insight Display LED combinations
View all HP ProLiant DL380p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Systems Insight Display LED combinations When the health LED on the front panel illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and the health LED indicate system status. Systems Insight Display Health LED LED and color Processor (amber) Red Processor (amber) DIMM (amber) DIMM (amber) Over temp (amber) Over temp (amber) PCI riser (amber) Fan (amber) Fan (amber) Power supply (amber) Amber Red Amber Amber Red Red Amber Red Red Power supply (amber) Amber Power cap (off) - Power cap (green) - Power cap (green) - System power LED Amber Green Green Green Green Amber Green Green Green Amber Green Amber Flashing green Green Status One or more of the following conditions may exist: • Processor in socket X has failed. • Processor X is not installed in the socket. • Processor X is unsupported. • ROM detects a failed processor during POST. Processor in socket X is in a pre-failure condition. One or more DIMMs have failed. DIMM in slot X is in a pre-failure condition. The Health Driver has detected a cautionary temperature level. The server has detected a hardware critical temperature level. The PCI riser cage is not seated properly. One fan has failed or has been removed. Two or more fans have failed or been removed. One or more of the following conditions may exist: • Only one power supply is installed and that power supply is in standby. • Power supply fault • System board fault One or more of the following conditions may exist: • Redundant power supply is installed and only one power supply is functional. • AC power cord is not plugged into redundant power supply. • Redundant power supply fault • Power supply mismatch at POST or power supply mismatch through hot-plug addition Standby Waiting for power Power is available. IMPORTANT: If more than one DIMM slot LED is illuminated, further troubleshooting is required. Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by replacing each DIMM in a bank with a known working DIMM. Component identification 11