HP ProLiant DL380p HP ProLiant DL380p Gen8 Server User Guide - Page 13
Non-hot-plug PCI riser board slot definitions
View all HP ProLiant DL380p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Item Description 1 UID LED/button 2 Power supply 2 LED 3 Power supply 1 LED 4 NIC activity LED 5 NIC link LED Status Off = Deactivated Solid blue = Activated Flashing blue = System being managed remotely Off = System is off or power supply has failed. Solid green = Normal Off = System is off or power supply has failed. Solid green = Normal Off = No network activity Solid green = Link to network Flashing green = Network activity Off = No network link Green = Network link Non-hot-plug PCI riser board slot definitions • Primary riser cage connector, connected to processor 1 or the southbridge 1 - FL/FH 2 - HL/FH 3 - HL/FH PCIe 3-slot riser cage* PCIe2 or PCIe3** x16 (16,8,4,2,1) PCIe2 or PCIe3** x8 (8,4,2,1) PCIe2 x8 (4,2,1)† PCIe 2-slot x16 riser cage - - - • Secondary riser cage connector, connected to processor 2 (Processor 2 must be installed) 4 - FL/FH 5 - HL/FH 6 - HL/FH PCIe 3-slot riser cage* PCIe2 or PCIe3** x16 (16,8,4,2,1) PCIe2 or PCIe3** x8 (8,4,2,1) PCIe2 or PCIe3** x8 (8,4,2,1) PCIe 2-slot x16 riser cage PCIe2 or PCIe3** x16 (16,8,4,2,1) PCIe2 or PCIe3** x16 (16,8,4,2,1) - *The server ships with one PCIe3 riser cage installed in the primary riser cage connector. **These slots can run 8 GT/s signaling rate in either PCIe2 or PCIe3 mode, depending on the capability of the installed processor. †PCIe slot 3 is connected to the southbridge and runs at the Gen2 signaling rate. Notes: • "Primary" denotes the riser cage is installed in the primary riser connector. • "Secondary" denotes the riser cage is installed in the secondary riser connector. • Installing the riser cages listed in the table above in either the primary or secondary riser connectors determines the form factor of the PCI cards supported by those riser cages. • FL/FH denotes full-length, full-height. HL/FH denotes half-length, full-height. LP denotes low profile. Component identification 13