HP ProLiant DL380p HP ProLiant DL380p Gen8 Server User Guide - Page 65
Installing a half-length expansion board, Remove the PCI riser cage
View all HP ProLiant DL380p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
6. Remove the expansion slot blank. To replace the component, reverse the removal procedure. Installing a half-length expansion board 1. Power down the server (on page 21). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Extend the server from the rack (on page 21). 4. Remove the access panel (on page 22). 5. Remove the PCI riser cage (on page 27). 6. Remove the expansion slot blank ("Removing the expansion slot blanks" on page 64). 7. Install the expansion board. 8. Connect any required internal or external cables to the expansion board. See the documentation that ships with the expansion board. Hardware options installation 65
Hardware options installation 65
6.
Remove the expansion slot blank.
To replace the component, reverse the removal procedure.
Installing a half-length expansion board
1.
Power down the server (on page
21
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend the server from the rack (on page
21
).
4.
Remove the access panel (on page
22
).
5.
Remove the PCI riser cage (on page
27
).
6.
Remove the expansion slot blank ("
Removing the expansion slot blanks
" on page
64
).
7.
Install the expansion board.
8.
Connect any required internal or external cables to the expansion board. See the documentation that
ships with the expansion board.