HP Rp3000 Hardware Reference Guide - HP rp3000 - Page 26
CAUTION, Connecting the Optical Drive Power and Data Cables
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4. Connect the power cable (1) and data cable (2) to the rear of the optical drive. Figure 2-20 Connecting the Optical Drive Power and Data Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 5. Connect the other end of the SATA data cable to the white system board connector labeled SATA 1. 6. Return the drive cage to the down position Figure 2-21 Lowering the Drive Cage 7. Replace the computer cover. 8. Reconnect the power cord and any external devices, then turn on the computer. 9. Lock any security devices that were disengaged when the computer cover was removed. The system automatically recognizes the drive and reconfigures the computer. 20 Chapter 2 Hardware Upgrades ENWW