HP Rp3000 Hardware Reference Guide - HP rp3000 - Page 42
If you are changing the Powered Serial Port Expansion Card COM 3 or COM 4 serial port, C-7
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
c. Return the drive cage to the down position. Figure C-7 Lowering the Drive Cage 7. If you are changing the Powered Serial Port Expansion Card COM 3 or COM 4 serial port configuration: a. Locate the Powered Serial Port Expansion Card in the expansion card slot. b. Remove the screw that secures the expansion card to the chassis (1). Hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket (2). Be sure not to scrape the card against the other components. Figure C-8 Removing the Powered Serial Port Expansion Card 36 Appendix C Powered Serial Ports ENWW
c.
Return the drive cage to the down position.
Figure C-7
Lowering the Drive Cage
7.
If you are changing the Powered Serial Port Expansion Card COM 3 or COM 4 serial port
configuration:
a.
Locate the Powered Serial Port Expansion Card in the expansion card slot.
b.
Remove the screw that secures the expansion card to the chassis (1). Hold the card at each
end, and carefully rock it back and forth until the connectors pull free from the socket (2). Be
sure not to scrape the card against the other components.
Figure C-8
Removing the Powered Serial Port Expansion Card
36
Appendix C
Powered Serial Ports
ENWW