HP Rp3000 Hardware Reference Guide - HP rp3000 - Page 35

B-5, Installing the PoweredUSB Expansion Card - 2 port powered usb

Get HP Rp3000 - Point of Sale System PDF manuals and user guides
UPC - 884420494096
View all HP Rp3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

8. To install the new PoweredUSB expansion card, lower the card into the chassis (1), install the screws that fasten the card to the chassis (2), and connect the cables to the card (3). NOTE: If there is a panel covering the opening for the ports on the rear of the chassis, you must remove the panel. You may need to remove the power cable from the clamp on the chassis so that it will reach the power connector on the card. If a ReadyBoost module is installed, you must remove it in order to plug in the Powered USB expansion card. Figure B-5 Installing the PoweredUSB Expansion Card 9. Return the drive cage to the down position. Figure B-6 Lowering the Drive Cage 10. Replace the computer cover. ENWW 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
8.
To install the new PoweredUSB expansion card, lower the card into the chassis (1), install the
screws that fasten the card to the chassis (2), and connect the cables to the card (3).
NOTE:
If there is a panel covering the opening for the ports on the rear of the chassis, you must
remove the panel.
You may need to remove the power cable from the clamp on the chassis so that it will reach the
power connector on the card.
If a ReadyBoost module is installed, you must remove it in order to plug in the Powered USB
expansion card.
Figure B-5
Installing the PoweredUSB Expansion Card
9.
Return the drive cage to the down position.
Figure B-6
Lowering the Drive Cage
10.
Replace the computer cover.
ENWW
29