HP Surestore 80fx 32/64/76 Slot, 5.2 Gbyte Drive Optical Jukebox Upgrade and C - Page 34

If Installing A C5132j/k/l Kit Or C5133j/k/l Kit Continue

Get HP Surestore 80fx - Optical Jukebox PDF manuals and user guides View all HP Surestore 80fx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

CAUTION Figure 3-5 Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes Install a New Interposer PCA and Add the Configuration Module • #4 - GPIO cable • #5 - power input and fan sense cables • #6 - vertical-path-clear emitter cable IF INSTALLING A C5132J/K/L KIT OR C5133J/K/L KIT CONTINUE WITH STEP 5 AND INSTALL A CONFIGURATION MODULE. IF INSTALLING A C5131J/K/L KIT GO TO THE NEXT PROCEDURE. 5. Mount the configuration module as shown in Figure 3-5 (into socket shown by #1 on Figure 3-4). 6. Route the SCSI cable, drive interface cable, and drive power cables up to the interposer PCA. Connect the drive power cable last, over the SCSI cable (see #3 on Figure 3-4). Make sure the cables are routed along the sides of the drive enclosures and do not interfere with the flow from the drive cooling fans. Mounting the Configuration Module 3- 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
3-8
Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
Install a New Interposer PCA and Add the Configuration Module
•
#4 - GPIO cable
•
#5 - power input and fan sense cables
•
#6 - vertical-path-clear emitter cable
IF INSTALLING A C5132J/K/L KIT OR C5133J/K/L KIT CONTINUE WITH
STEP 5 AND INSTALL A CONFIGURATION MODULE.
IF INSTALLING A C5131J/K/L KIT GO TO THE NEXT PROCEDURE.
5.
Mount the configuration module as shown in Figure 3-5 (into socket shown by
#1 on Figure 3-4).
6.
Route the SCSI cable, drive interface cable, and drive power cables up to the
interposer PCA.
Connect the drive power cable last
, over the SCSI cable (see #3 on Figure 3-4).
CAUTION
Make sure the cables are routed along the sides of the drive enclosures and do not
interfere with the flow from the drive cooling fans.
Figure 3-5
Mounting the Configuration Module