HP Surestore 80fx 32/64/76 Slot, 5.2 Gbyte Drive Optical Jukebox Upgrade and C - Page 51

Checking and Downloading Firmware

Get HP Surestore 80fx - Optical Jukebox PDF manuals and user guides View all HP Surestore 80fx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

NOTE Downloading Firmware Checking and Downloading Firmware Checking and Downloading Firmware If upgrading a jukebox: 1. Go to "Check the Firmware Revision Level" to see if the jukebox controller and/or drives need the current revision of firmware. 2. Go to "Downloading Firmware" if necessary. If converting a 2.6-GB-drive jukebox: 1. Go to "Downloading Firmware" and download the current revision of jukebox controller firmware. 2. Go to "Check the Firmware Revision Level" to see if the drives need current firmware. 3. Go to "Downloading Firmware" if Step 2 shows that the drives need current firmware. Check the Firmware Revision Level 1. Ensure the jukebox is powered on. 2. Press NEXT to select INFO *, then press ENTER. 3. REVISION # displays. Press ENTER to view the robotics controller firmware revision. 4. Write down the revision number, then press CANCEL. 5. Press NEXT until DRIVE FW * displays, then press ENTER. UPDATING displays briefly, then Dx REV zzzz displays (where x represents a drive number and z represents the revision level of that drive). 6. Press NEXT or PREV to select other drives and press ENTER. 7. After viewing the revision level for all drives, press CANCEL. 4- 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
4-3
Downloading Firmware
Checking and Downloading Firmware
Checking and Downloading Firmware
NOTE
If upgrading a jukebox:
1.
Go to “Check the Firmware Revision Level” to see if the jukebox controller
and/or drives need the current revision of firmware.
2.
Go to “Downloading Firmware” if necessary.
If converting a 2.6-GB-drive jukebox:
1.
Go to “Downloading Firmware” and download the current revision of jukebox
controller firmware.
2.
Go to “Check the Firmware Revision Level” to see if the drives need current
firmware.
3.
Go to “Downloading Firmware” if Step 2 shows that the drives need current
firmware.
Check the Firmware Revision Level
1.
Ensure the jukebox is powered on.
2.
Press
NEXT
to select
INFO *
, then press
ENTER
.
3.
REVISION
#
displays. Press
ENTER
to view the robotics controller firmware
revision.
4.
Write down the revision number, then press
CANCEL
.
5.
Press
NEXT
until
DRIVE FW *
displays, then press
ENTER
.
UPDATING displays briefly, then
Dx REV zzzz
displays (where x represents
a drive number and z represents the revision level of that drive).
6.
Press
NEXT
or
PREV
to select other drives and press
ENTER
.
7.
After viewing the revision level for all drives, press
CANCEL
.