HP Vectra VE 6/xxx HP Vectra VE 6/xxx Series 8, User's Guide for Minitower Mod - Page 20
After Your PC Has Restarted
View all HP Vectra VE 6/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1 Setting Up and Using Your PC Starting and Stopping Your PC After Your PC Has Restarted • Set the keyboard in a comfortable position. • Adjust the screen's brightness and contrast to suit your needs. If the picture does not fill the screen or is not centered, adjust it using the controls on the display. Refer to the display's manual for details. Changing the Operating System If you change the operating system used by your PC, ensure that the Plug and Play Aware O/S field in the Setup program is correctly set. If you are using the preinstalled operating system, this field should already be correctly set. (To enter the PC's Setup program, press during startup.) To check if the your operating system is Plug and Play, refer to the operating system documentation. Stopping Your PC To stop the PC, make sure that you have exited all programs and the operating system (if necessary), and then press the power button on the control panel. With some operating systems the PC will automatically switch off when you shut down the operating system. If there is a problem during the shutdown procedure and the software hangs, then, after one minute press the on/off button for four seconds. This turns off the power but may result in data being lost. You should only use this method of turning off the PC when the normal shutdown procedure does not work. Refer to the operating system manual for details on how to shut down or exit the operating system. 12 English