HP Vectra VE 6/xxx HP Vectra VE 6/xxx Series 8, User's Guide for Minitower Mod - Page 43
If Your PC Has a Hardware Problem
![]() |
View all HP Vectra VE 6/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
WARNING 3 Troubleshooting Your PC If Your PC Has a Hardware Problem If Your PC Has a Hardware Problem This section describes what to do if you have problems with your display, keyboard, or mouse. Be sure to disconnect the power cord and any telecommunications cables from your computer before you remove the cover to check the cable connections or jumper settings. To avoid electric shock and harm to your eyes by laser light, do not open the CD-ROM drive enclosure. The CD-ROM drive should be serviced by service personnel only. Refer to the label on the CD-ROM for power requirements and wavelength. This PC is a class 1 laser product. Do not attempt to make any adjustment to the laser unit. Display Does Not Work Properly If Nothing Is Displayed on the Screen If nothing is displayed on the screen, but the PC starts and the keyboard and other peripheral devices seem to operate properly: • Check that you have entered the correct password, if one is required to use this PC. • Check that the display's brightness and contrast controls are properly set. • Check that the display video cable is correctly connected. • Check that the display is plugged in and switched ON. • Switch off the display, and unplug it from the power outlet. Disconnect the video cable and examine the video cable connector pins. If the pins are bent, carefully straighten them. English 35
![](/manual_guide/products/hewlettpackard-vectra-ve-6xxx-hp-vectra-ve-6xxx-series-8-users-guide-minitower-models-b2f51b6/43.png)