HP W2338h HP 2310mfa, 2310mfd LCD Monitors - User Guide - Page 10

SETTING UP THE MFM IMPORTANT: Do not apply pressure to the screen display area, which may compromise the integrity of the display. The manufacturer's warranty does not cover user abuse or improper installation. ATTACHING THE BASE IMPORTANT: The Base of the MFM must be assembled prior to usage. 1. Place MFM unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the MFM 2. Carefully align and insert the Base to the stand. 3. Gently push the Base towards the MFM until the locking mechanism locks into place. ATV Interface PREPARING THE MFM FOR WALL MOUNTING Place the MFM at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your MFM on the wall, you need to remove the base. For your safety, please use listed wall mount bracket with minimum weight of the MFM without stand. ( page 34-35.) To prepare the MFM to attach a wall mount bracket (sold separately): 1. Loosen the screws holding your MFM to the stand and remove the stand base from the MFM. 2. Secure the third party wall mount bracket to the back of your MFM using four screws, as indicated in the illustration. ATV Interface 100 mm M4 screws 100 mm DTV Interface DTV Interface 100 mm M4 screws 100 mm NOTE • Wall mount bracket & screws are not included 8