HP W2338h HP 2310mfa, 2310mfd LCD Monitors - User Guide - Page 34

NOTICES Power Cord Set Requirements The MFM power supply is provided with Automatic Line Switching (ALS). This feature allows the MFM to operate on input voltages between 100-120V or 200-240V. The power cord set (flexible cord or wall plug) received with the MFM meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).If you have questions about the type of power cord to use, contact an authorized HP service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. 32