Hitachi CMP402HDU Owners Guide - Page 15

ENGLISH Connecting to Video Equipment (such as a video disc player, a DVD player, or a video camera) Read Usage Notes ( to ) carefully to ensure maximum safety before proceeding to these steps: 1) Choose an appropriate site and install the product on a level table where the stand is secure. Install the monitor to have ready access to a power socket available. 2) Make sure that the monitor's power switch is off. The monitor is shipped with the power switch off. 3) Make sure that the video equipment's power switch is off. 4) Interconnect the signal input terminal on the monitor rear panel and the video equipment's signal output terminal to each other using an optional cable. 5) Insert one end of the power cable included into the rear-panel power cable connector and the other end into a power socket. 6) Turn on the monitor, then the video equipment's to make sure that a display image appears on the monitor screen. For instructions on turning on the monitor and adjusting its display images, see "Operating Instructions" ( 9 to 16 ). Monitor rear panel To audio output terminals White(W) Red(R) SPEAKER TERMINAL (8‰8W) +- -+ R L Wh(iWte) Power cable Power cable connector AUDIO IN L/MONO R Nearer Terminal White Further term(inWal) Red (R) VIDEO2 COMPONENT IN VIDEO1 COMPOSITE IN PR/CR PB/CB Y VIDEO S Yellow (V) To audio/ video input terminals To component input terminals To S video input terminals To component output terminals To audio/video output terminals Yellow(V) White(W) Red(R) To S video output terminals Video equipment (such as a video disc player, a DVD player, and a video camer) Use if the video equipment has an S video input terminal Re(Rd) To audio input terminals If video equipment with an S video input terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If an S video input terminal and a video input terminal connect to the monitor at the same time, S video input would govern.) 7