Hitachi CMP402HDU Owners Guide - Page 17

ENGLISH OPERATING INSTRUCTIONS Turning Power On and Off To turn on the set power supply, set the MAIN POWER switch ( ) of the main unit to ON and then press the SUB POWER button or the POWER button of the remote control. To turn off the set power supply, press the SUB POWER button of the main unit or the POWER button of the remote control, then set the MAIN POWER switch ( ) to OFF. For normal operations, leave the main power switch ( ) set to ON and use the sub power switch or the Power button of the remote control to turn the power on and off. Display lamp Power status Operating Off Off When the main power switch is set to OFF. Lights red Lights or blinks green Off (standby) * On When the main power switch is set to ON and Power button of the remote control or the sub power button on the control panel located at the front part of the bottom plate is off. When the main power switch is set to ON and Power button of the remote control or the sub power button on the control panel located at the front part of the bottom plate is on. When the indicating lamp blinks in green or the message "POWER SAVE" or "OUT OF FREQUENCY" appears on the screen, there is something unusual about the status of reception. See "Symptoms That Seemingly Appear to be Failures." 21 Main power switch *The "standby" mentioned here is different from the "standby" in Power Saving System 20 . SUB-POWER Set unit POWER Remote controller TIPS Avoid repeatedly turning the monitor on and off at short time intervals. Failures might result from such operation. Turn off the main power switch ( ) before leaving the monitor out of use for an extended period of time. If a power failure occurs while the set is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the set. 9