Hitachi CMP402HDU Owners Guide - Page 22

ENGLISH OPERATING INSTRUCTIONS (continued) Adjustment Item List (continued) Menu item Selected characters Adjustment item VGA APPLE 13-inch DISPLAY AREA Display area SVGA XGA SXGA(60) APPLE 16-inch 19-inch NORMAL FULL FULL UP/LF UP/RI DW/LF DW/RI FULL UP/LF UP/RI DW/LF DW/RI Setup hint Set to FULL to display images across the screen for gaining an overview of the overall images. A schematic view of the display is shown on 16 . H.POSITION V.POSITION CENTER CENTER SXGA(75) FULL Horizontal position Moves the horizontal position to left. Moves the horizontal position to right. Adjust the left-side display position. Vertical position Moves down the vertical position. Moves up the vertical position. Adjust the vertical display position. M DISPLAY if RGB is A selected I N CLOCK PHASE Dot clock frequency Reduces the dot clock Increases the dot clock frequency (shrinks the frequency (expands right side). the right side). Adjust for maximum character clarity. 23 Dot clock phase Slows the dot clock Advances the dot clock phase (shifts slightly to phase (shifts slightly to left). right). Adjust for clear character visibility. 24 DISPLAY INIT. DISPLAY if VIDEO is selected SCAN (*) INITIALIZE DISPLAY SIZE V.POSITION Scan system Display initialization Display size INT P.SCAN Clears all DISPLAY Exits to the DISPLAY MENU adjustment MENU, without values and exits to the clearing the menu DISPLAY MENU. adjustment values. 4:3 FULL 000 PANOR.00 000 MOVIE1000 000 MOVIE2000 4:3 FULL 000 PANOR.000 000 MOVIE1000 000 MOVIE2000 Setting INT when FULL display is not possible while receiving an signal above SVGA makes text easier to view. Clear the user signal preset data. 18 Select to suit the aspect ratio of the video software. Vertical position MOVIE1/MOVIE2 set Adjust the vertical position when subtitles cannot be read. V.SIZE Vertical size MOVIE1/MOVIE2 set Adjust until the black band (blanking) at the top and bottom is no longer visible. * Displayed only when FULL is selected as the DISPLAY AREA. The display mode is stored in memory separately for video and component video. Componet/S signal (video1 input) and componet (SD1 480I) signal applicable for all modes. 14 For component (HD1: 480P) signals, the display mode is selectable among 4:3, MOVIE1, and FULL. For component (HD3: 1035I, 1080I) signals, the display mode is not selectable.