Hitachi CMP402HDU Owners Guide - Page 19

ENGLISH Contrast Adjustment While the on-screen display system, EasyMenu 12 , is not on display, press the remote controller SELECT button or to adjust the contrast. When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical (V) frequencies of the input signal will be displayed in a guidance image. While the guidance is on display, press the key to narrow the difference between darkness and brightness. While the guidance is on display, press the key to widen the difference between darkness and brightness. You can also adjust the contrast setting via the onscreen display system, EasyMenu 12 The contrast adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.) Contrast setting Remote controller SELECT CONTRAST : 100 ** * ** * H : . kHz, V : . Hz Input horizontal frequency Input vertical frequency Adjustment status guidance Sound Mute Press the remote controller MUTE button to mute the sound temporarily. When you press the button, [MUTE] (pink) and the status of volume setting will be displayed in a guidance image. While the sound is muted, press the button to turn down the volume. While the sound is muted, press the button to cancel the mute. You can also adjust the sound volume setting of the mute via the on-screen display system, EasyMenu 12 Remote controller MUTE Sound volume setting MUTE : 30 (The display will turn to pink.) Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard. When MUTE is used, the guide display will continue for 5 sec. and then turn off. Input Signal Status Display Press the remote controller RECALL button to display the status of input signals on the screen. Press the remote controller RECALL button once again to exit the screen display. The contrast adjustment mode will exit when no keys are entered for 5 seconds. Remote controller RECALL Input terminal name RGB1 [D-SUB] H : 46.5kHz, V : 60Hz Input horizontal frequency Input vertical frequency 11