Hitachi CMP402HDU Owners Guide - Page 20

ENGLISH OPERATING INSTRUCTIONS (continued) On-Screen Display System, EasyMenu Press the MENU button to open an adjustment menu allowing you to complete various adjustments and settings using the SELECT buttons (The , , , and remote control or the SELECT or VOLUME button of the main unit.). Pink keys of the Press the SELECT button of the main unit ( or key of the remote control) to select an item by moving the pink text. Press the VOLUME button and the and keys of the main unit ( or key of the Remote controller MENU MAIN MENU PICTURE SOUND DISPLAY FUNCTION remote control) to adjust or set the selected item, or to switch the menu. SELECT When a choice is followed by ":", it indicates that the choice can be adjusted or changed. Menu selection mark When a choice is followed by , a menu can be opened by pressing the remote-controller SELECT button or the set SELECT button and VOLUME button . Set unit MENU Pink when brightness is selected When [RETURN] is selected, press the remotecontroller button SELECT or the set SELECT button and VOLUME button to exit to the original menu For information on adjusting and setting SELECT PICTURE MENU CONTRAST :117 BRIGHTNESS :0 OPTIONS RETURN choices, see 13 to 16 . VOLUME Guidance Press the MENU button once again to exit the adjustment menu. The adjustment menu will close automatically when no keys are entered for 10 seconds. Useful knowledge HINTS 12 It is recommended that, when inputting a computer signal to the main unit to get a grasp of the overall image, the DISPLAY AREA of a 1024 x 768 VESA display at 75Hz be set to FULL with SCAN set to INT. 14 Flicker can occur when a personal computer signal is input.If the vertical frequency is less than 75Hz, it is recommended that the vertical frequency be increased (upper limit: 75Hz). Burn-in (residual image) can occur if the same image is displayed for an extended time. To reduce this possibility, change the display contents at suitable intervals. If special images created on a PC or any other equipment (such as those composed of a checker-flag pattern) are displayed across the screen, the hue may be varied depending on the contrast or brightness setting.