Hitachi CMP402HDU Owners Guide - Page 26

OTHERFEATURES (continued) ENGLISH Reset (Settings Initialization) The EasyMenu shown to the right will be displayed when the SELECT button is used to select DISPLAY and moreover INITIALIZE ? DISPLAY INT is selected from the On-screen Display YES NO System Easy Menu 12 . If the key (select YES) of the SELECT button is pressed at this time, the user adjustment values in the table below for the signal currently being received will be deleted and the factory settings will be restored. Pressing the key (select NO) cancels deletion and returns the DISPLAY menu. DISPLAY menu item H.POSITION V.POSITION CLOCK PHASE Scan system Vertical size Display area Display size Display H.POSITION V.POSITION CLOCK PHASE SCAN V. SIZE DISPLAY AREA DISPLAY SIZE Application RGB1, RGB2 RGB1, RGB2, VIDEO1, VIDEO2 RGB1, RGB2 RGB1, RGB2 RGB1, RGB2 VIDEO1, VIDEO2 RGB1, RGB2 VIDEO1, VIDEO2 Signal Check The status of signal reception is checked automatically and the result is displayed on the screen. Status Signals are received normally. Display The input terminal and the horizontal and vertical frequencies are displayed in a guidance image. A sync signal could not be detected. The guidance message "POWER SAVE" is displayed for about 5 seconds. In the event of continued absence of a sync signal, the power indicating lamp flickers and the monitor enters power save mode. Action RGB1 [D-SUB] H : 46.5kHz, V : 60Hz Check the power switch of the PC and its status of connection. Either VIDEO or S VIDEO is displayed on VIDEO input. POWER SAVE The input signal does not meet display specifications or erratic. The guidance message "OUT OF FREQUENCY" is displayed for about 5 seconds. Check the input signal specifications once again. 25 27 OUT OF FREQUENCY The input signal appears compressed (reduced display). The input terminal and the horizontal and vertical frequencies are displayed in a guidance image, along with the message "DOT COMPRESSION" DOT COMPRESSION RGB1 [D-SUB] H : 63.7kHz, V : 60Hz 18