Hitachi CMP402HDU Owners Guide - Page 18

ENGLISH OPERATING INSTRUCTIONS (continued) Input Selection Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the sequence of RGB1 -> RGB2 -> VIDEO1 -> VIDEO2 -> RGB1. When the same signal is input to RGB1 and RGB2, the phase may in some cases shift slightly but this is not a malfunction. In such case, readjust the PHASE of the one being used. Remote controller RGB/ VIDEO Set unit RGB/VIDEO RGB1 (D-sub input) RGB2 (BNC input) VIDEO1 (composite or S input) VIDEO2 (COMPONENT input) Volume Adjustment While the on-screen display system, EasyMenu ( 12 ) is not on display, press the remote controller VOLUME button or (or the unit VOLUME button or to adjust the sound volume. The adjustment status will be displayed as guidance while you press these buttons. While the guidance is on display, press or to turn up the volume. While the guidance is on display, press or to turn down the volume. You can also adjust the sound volume setting via the on-screen display system, EasyMenu 12 The sound volume adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.) Remote controller VOLUME Set unit VOLUME Sound volume setting VOLUME : 30 Adjustment status guidance 10