Hitachi CMP402HDU Owners Guide - Page 25

ENGLISH OTHER FEATURES Automatic Store Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Item Display Registration condition Reproduction condition Sound volume VOLUME Sound balance BALANCE Treble TREBLE Bass BASS Mute volume MUTE LEVEL Input status automatic display AUTO FREQ. Enlargement INTERPOLATION Line correction LINE INTP. Three-dimensional Y/C separation 3D COMB HD signal COMPONENT Language selection LANGUAGE One set can be recorded. During normal signal reception. Brightness Cntrast Color temperature Gamma correction Input signal level Color Tint Sharpness BRIGHTINES CONTRAST COLOR SELECT GAMMA VIDEO LEVEL COLOR TINT SHARPNESS One set can be recorded during common RGB1, RGB2 input; one set of two can be recorded during normal signal reception with common VIDEO 1, VIDEO 2 input. During normal signal reception. One set can be recorded during common VIDEO 1, VIDEO 2 input. During normal signal reception. Display area Display size Horizonal position Vertical position Dot clock frequency Dot clock phase Verical size DISPLAY AREA DISPLAY SIZE H.POSITION V.POSITION CLOCK PHASE V. SIZE One group can be recorded for each signal mode. During recording and when the same signal mode is detected. The previously recorded items will be lost. The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the elements are the same or similar will be handled as the same signal. Contents that can be recorded are supplied for each signal mode for RGB 1 and RGB 2 input, and for VIDEO 1 or VIDEO 2 input. Because of this, adjustment may not be appropriate when contents 17