Hitachi DS10DFL Service Manual - Page 7

SPECIFICATIONS 1. Specifications Model Screw driving Capacity Drilling Keyless chuck Rotation speed Torque Type of motor Type of switch Enclosure Type of battery Nominal voltage Battery (Type Nominal life Nominal capacity BCL 1015) Charging time Charging temperature Charger (Model UC 10SFL) Weight Net Gross DS 10DFL Machine screws ---6 mm (1/4") Wood screws-------5.8 (dia.) x 45 mm (#12 x 1-25/32") Metal 10 mm (3/8") for mild steel [1.6-mm thick (1/16")] 12 mm (15/32") for aluminum [1.6-mm thick (1/16")] Wood 21 mm (13/16") [18-mm thick (11/16")] Mount type----------Screw-on (UNIF 3/8" - 24) Diameter 0.8 to 10 mm (1/32" to 3/8") Low: 0 to 300 min -1, High: 0 to 1,300 min-1 Slip torque ----------0.5 to 4.0 N•m (5 to 40 kgf•cm, 4 to 35 in-lbs.) [21 stages] DC magnet motor Trigger switch with pushing button for forward and reverse rotation changeover (with brake) Body Glass fiber-reinforced polycarbonate resin (black) and thermoplastic elastomer (green) Battery Polycarbonate resin (black) Charger ABS resin (black) Sealed cylindrical lithium-ion storage battery DC 10.8/12 V PEAK Charging/discharging: approximately 1,000 times 1.5 Ah Approx. 40 minutes (with UC 10SFL Charger at ambient temperature of 20°C (68°F)) 0°C to 50°C (32°F to 122°F) x Overcharge prevention system: (1) Stop current detection (2) Battery surface temperature detection (thermostat or thermistor) x Input capacity: 35 W x The maximum allowable temperature of the Type BCL 1015 battery is 50°C (122°F). x Indication method: Pilot lamp to indicate charging state x Pilot lamp: On During charging Off Charging completed Main body (including Type BCL 1015 battery) -------- 1.0 kg (2.2 lbs.) Charger unit (including cord 0.35 kg (0.8 lbs.) DS 10DFL (2LCSK) (including Type BCL 1015 battery) Standard accessories x Charger (UC 10SFL 1 x Battery (Type BCL 1015 2 x Phillips driver bit (No. 2 1 x Battery cover 1 x Case 1 -4-