Hitachi HTS541040G9AT00 Specifications - Page 130
Table 75: Identify device information. Part 5 of 7
UPC - 000059826569
View all Hitachi HTS541040G9AT00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Table 75: Identify device information. (Part 5 of 7 Word 86 87 88 89 90 Content Description 3XXXH Command set/feature enabled * 15-14(=0) Reserved 13(=1) 1=FLUSH CACHE EXT command supported * 12(=1) 1=FLUSH CACHE command supported 11(=x) 1=Device Configuration Overlay supported * 10(=1) 1=48-bit Address feature set supported 9(=X) 1=Automatic Acoustic Management enabled 8(=X) 1=SET MAX security extension enabled 7(=X) 1=Address Offset mode enabled 6(=1) 1=SET FEATURES subcommand required to spin-up 5(=X) 1=Power-Up In Standby feature set has been enabled via the SET FEATURES command 4(=0) 1=Removable Media Status Notification Feature Set enabled 3(=X) 1=Advanced Power management Feature Set enabled 2(=0) 1=CFA Feature Set supported 1(=0) 1=READ/WRITE DMA QUEUED command supported 0(=0) 1=DOWNLOAD MICROCODE command supported 4023H Command set/feature enabled 15(=0) Always 14(=1) Always 13-6(=0) Reserved 5(=1) 1=General Purpose Logging feature set supported 4-2(=0) Reserved 1(=1) 1=SMART self-test supported 0(=1) 1=SMART error logging supported XX3FH Ultra DMA Transfer mode (mode 5 supported) 15-14(=0) Reserved 13(=X) 1=UltraDMA mode 5 is selected 12(=X) 1=UltraDMA mode 4 is selected 11(=X) 1=UltraDMA mode 3 is selected 10(=X) 1=UltraDMA mode 2 is selected 9(=X) 1=UltraDMA mode 1 is selected 8(=X) 1=UltraDMA mode 0 is selected 7- 6(=0) Reserved **5(=1) 1=UltraDMA mode 5 is selected **4(=1) 1=UltraDMA mode 4 is supported **3(=1) 1=UltraDMA mode 3 is supported **2(=1) 1=UltraDMA mode 2 is supported **1(=1) 1=UltraDMA mode 1 is supported 0(=1) 1=UltraDMA mode 0 is supported XXXXH Time required for security erase unit completion Time= value (XXXXh)*2 [minutes] 0000H Time required for Enhanced security erase completion 0000 : Not supported * indicates the use of those parameters that are vendor specific. ** indicates a feature that is able to be unsupported by the Device Configuration Overlay command. Travelstar 5K100 Hard Disk Drive Specification 116