Honeywell HPF24S6 Installation Manual - Page 7

HPF24S Series Power Supplies —

P/N 52751:F2

7/11/2014

7

It is imperative that the installer understand the requirements of the Authority Having Jurisdiction

(AHJ) and be familiar with the standards set forth by the following regulatory agencies:

•

Underwriters Laboratories Standards

•

NFPA 72 National Fire Alarm Code

NFPA Standards

NFPA 72 National Fire Alarm Code

NFPA 70 National Electrical Code

Underwriters Laboratories Documents:

UL 464 Audible Signaling Appliances

UL 864 Standard for Control Units for Fire Protective Signaling Systems

UL 1638 Visual Signaling Appliances

UL 1971 Signaling Devices for Hearing Impaired

UL 2572 Standard for Mass Notification Systems

CAN/ULC - S524-01 Standard for Installation of Fire Alarm Systems

CAN/ULC-S527-99 Standard for Control Units for Fire Alarm Systems

Other:

NEC Article 250 Grounding

NEC Article 300 Wiring Methods

NEC Article 760 Fire Protective Signaling Systems

Applicable Local and State Building Codes

Requirements of the Local Authority Having Jurisdiction (LAHJ)

Canadian Electrical Code, Part 1

Other HPP Documents:

Device Compatibility Document

Document #54399

This product has been certified to comply with the requirements in the Standard for Control Units

and Accessories for Fire Alarm Systems, UL 864, 9th Edition.

Operation of this product with prod-

ucts not tested for UL 864, 9th Edition has not been evaluated.

Such operation requires the

approval of the local Authority Having Jurisdiction (AHJ).

Before proceeding, the installer should be familiar with the following documents.

Section	Page
Table of Contents	5
Section 1: System Overview	8
1.1 General	8
1.2 Features	8
1.3 Start-up Procedure	9
1.4 Jumpers	10
1.4.1 Jumper JP1 - Ground Fault Detection	10
1.4.2 Jumpers JP2 and JP3: Coded/Noncoded Input Selection	10
1.5 LED Indicators	10
1.6 Specifications	10
1.7 General	13
Section 2: Installation	14
2.1 Backbox Mounting	14
2.2 NAC Circuit Wiring	16
2.2.1 Style Y (Class B)	16
2.2.2 ZNAC-4 Class A Option Module	16
2.3 Addressable Module Mounting	17
2.4 NEC Power-limited (Class 2) Wiring Requirements	18
Section 3: Programming Options	20
3.1 DIP Switch Settings	21
3.2 Programmable Features Description	22
3.2.1 Synchronization Type Selection	22
Maximum Number of Strobes for Synchronization	22
3.2.2 Synchronization Mode - Master/Slave	22
3.2.3 AC Fail Delay/Aux. Trouble Relay Function	23
3.2.4 Input/Output Function	23
Auxiliary Power Control	24
3.2.5 Charger Enable/Disable	24
3.2.6 Door Closers	24
Section 4: Trouble Supervision	26
4.1 Supervision via FACP Notification Appliance Circuit	26
4.1.1 Supervision of FACP to HPF24S wiring	26
4.1.2 Supervision of HPF24S Faults	26
4.1.3 Aux. Trouble Relay/AC Fail Relay	26
4.2 AC Loss Reporting Delay	27
Section 5: Applications	28
5.1 Controlling Four NACs With One Input and Selective Silence	28
5.2 Controlling Three NACs and One Door Holder With One Input	30
5.3 Split Temporal Mode of Operation	32
5.4 Remote Supply With Resettable and Nonresettable Power	33
5.5 Master FACP with Slave HPF24S Power Supply	35
5.6 Master HPF24S Power Supply Connected to FACP	36
5.7 Canadian Applications	36
Section 6: Power Supply Requirements	38
6.1 Overview	38
6.2 Calculating the AC Branch Circuit	38
6.3 Calculating the System Current Draw	39
6.3.1 Overview	39
6.3.2 How to Calculate System Current Draw	39
6.4 Calculating the Battery Size	41
6.4.1 NFPA Battery Requirements	41
6.4.2 Selecting and Locating Batteries	41
Appendix A: Wire Requirements	43

Honeywell HPF24S6 Installation Manual - Page 7

Before proceeding, the installer should be familiar with the following documents., NFPA Standards

Page 7 highlights