Icom IC-SAT100M Operating Manual
Icom IC-SAT100M Manual
 |
View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Icom IC-SAT100M manual content summary:
- Icom IC-SAT100M | Operating Manual - Page 1
OPERATING MANUAL SATELLITE PTT iSAT100M INTRODUCTION 1 PANEL DESCRIPTIONS 2 BASIC OPERATION 3 OTHER FUNCTIONS 4 MENU SCREEN 5 CONNECTING AND MAINTENANCE 6 SPECIFICATIONS AND OPTIONS 7 TROUBLESHOOTING - Icom IC-SAT100M | Operating Manual - Page 2
product should provide you with years of trouble-free operation. Important READ ALL INSTRUCTIONS carefully before using the transceiver. This OPERATING MANUAL contains advanced features and operating instructions for the IC-SAT100M. READ also the BASIC MANUAL that is supplied with the transceiver - Icom IC-SAT100M | Operating Manual - Page 3
the AH-40 19 7 TROUBLESHOOTING 21 ■■Troubleshooting 21 Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, iPadOS are described as "iOSˮ in this manual. All other products or brands are registered trademarks or trademarks of their respective holders - Icom IC-SAT100M | Operating Manual - Page 4
1 PANEL DESCRIPTIONS Microphone Description 12 11 1 10 2 3 4 5 6 9 7 8 Microphone Speaker 1 EMERGENCY KEY [EMER] Hold down to transmit an Emergency call. 2 SIDE 1 KEY [S1] Push to display the Message List. 3 PTT SWITCH [PTT] Hold down to transmit, release to receive. 4 P1/P2 - Icom IC-SAT100M | Operating Manual - Page 5
1 PANEL DESCRIPTIONS Function display 1 2 00:00 Icon area Text area Last call Scan Key display area LLThe display is shown in English as an example. Select other languages on the Menu screen, if necessary. ([OK] > Display > Language) DDIcon Area Indicators 1 SIGNAL STRENGTH Displays the - Icom IC-SAT100M | Operating Manual - Page 6
2 BASIC OPERATION Receiving and transmitting D Turning ON the transceiver z Hold down [VOL] for 1 second to turn ON the transceiver. • The transceiver searches a satellite. • When the transceiver connected and registered to the satellite, the status "IDLE," transceiver name, and Talkgroup name is - Icom IC-SAT100M | Operating Manual - Page 7
3 OTHER FUNCTIONS Using the Message function The transceiver can receive and send short messages. DDReceiving When receiving, a received message's header and the Talkgroup name are displayed. LLPush [RX MSG] to display a received message. 00:00 HELLO! TALKGROUP01 Last Call RX MSG DDTransmitting - Icom IC-SAT100M | Operating Manual - Page 8
3 OTHER FUNCTIONS Using the Surveillance function When this function is turned ON, the beep is not heard and the backlight and the Status indicator do not light, even when a signal is received, or a key is pushed. 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key - Icom IC-SAT100M | Operating Manual - Page 9
4 MENU SCREEN Using the Menu screen You can use the Menu screen to set infrequently changed values or function settings. The Menu screen is constructed in a tree structure. You can go to the next tree level by pushing [RIGHT] or [OK], go back a level pushing [LEFT] or [BACK]. To select an item, - Icom IC-SAT100M | Operating Manual - Page 10
NOTE: To pair an iOS device, update the IC-SAT100M main firmware to Revision 1.2. Ask your dealer for details Bluetooth device. ••OFF: The user must manually connect to a bonded device. ••ON: device information such as the device name, address, support profile, version, and so on. Key Beep ( - Icom IC-SAT100M | Operating Manual - Page 11
4 MENU SCREEN Menu items DDFunctions Auto Key Lock Turn the Auto Keypad Lock function ON or OFF. ••OFF: Turns OFF the function. ••ON: The transceiver locks the keypad* when no key is pushed for 30 seconds. * Except for [EMER], [PTT], [VOL], and Talkgroup selector. Key Setup - Icom IC-SAT100M | Operating Manual - Page 12
4 MENU SCREEN Menu items DDDisplay Backlight Select a Backlight setting. ••OFF: The backlight is always OFF. ••ON: The backlight is always ON. ••Auto (Key): When any switch except [PTT] is pushed, the backlight lights for 5 seconds. ••Auto (Dim): The backlight automatically becomes dark - Icom IC-SAT100M | Operating Manual - Page 13
5 CONNECTING AND MAINTENANCE Rear panel connection 1 2 Optional speaker 5 RRWARNING! NEVER remove the fuse holders from the DC power cable. Red: +, 3 Black: _ NOTE: Use the terminals as shown below for the cable connections. Crimp Solder 4 4 Fuse holders 12 V or 24 V Battery 1 EXTERNAL - Icom IC-SAT100M | Operating Manual - Page 14
damage the transceiver's surfaces. DDFuse replacement Fuses are installed in the supplied DC power cable. If a fuse blows, track down the source of the problem, repair it, and then replace the damaged fuse with a new rated one. LLFuse coding explanation Fuse coding: FUSE 125V 5A Fuse voltage rating - Icom IC-SAT100M | Operating Manual - Page 15
5 CONNECTING AND MAINTENANCE Installing the antenna D About the antenna position Keep a minimum of 20 cm (7.9 inch) between the Antenna unit and your body. Move away from buildings and use the transceiver in areas with an open sky. Install the outdoor antennas in a place with a clear view of the - Icom IC-SAT100M | Operating Manual - Page 16
5 CONNECTING AND MAINTENANCE D About the antenna unit IMPORTANT! The antenna unit must have an adequate ground connection. Otherwise, the antenna circuit may be damaged by a lightning strike or static electricity. Interference, RF feedback, and electrical shocks from other equipment could also - Icom IC-SAT100M | Operating Manual - Page 17
5 CONNECTING AND MAINTENANCE DDConnect the antenna unit and the LAN cable ••Connect the main unit and the supplied LAN cable (Length: approximately 20 m) as describe below. LLThe supplied LAN cable is a Shielded Ethernet Cable, so that use the supplied cable to connect the units. CAUTION: Be sure - Icom IC-SAT100M | Operating Manual - Page 18
. When removing, slide the transceiver towards you while pushing the lever down. Lever Self-tapping screws Mounting screws Spring washers Flat washers IC-SAT100M Mounting bracket Nuts To reduce vibration, place the cushion on the transceiver and put the sheet on it. LLW hen mounting the - Icom IC-SAT100M | Operating Manual - Page 19
6 SPECIFICATIONS AND OPTIONS Specifications LLAll stated specifications are subject to change without notice or obligation. DDGeneral ••Frequency range: 1616 ~ 1626.5 MHz ••Number of channels: 240 Channels ••Type of emission: 41K7Q7W ••Duplexing method: TDD (Time Domain Duplex) •• - Icom IC-SAT100M | Operating Manual - Page 20
with a [PTT] switch. About the third party Bluetooth headsets: Icom has checked the PTT operation with some 3M Peltor headsets such as the chat through a satellite communication network by connecting an IC-SAT100M. See the RS-SAT100 INSTRUCTIONS for details. LLSome options may not be available in - Icom IC-SAT100M | Operating Manual - Page 21
, and then push [OK]. LLA passkey or PIN code may be required to pair, depending on the headset. Refer to your headset or device's instructions for details. 4. H old down [BACK] for 1 second to exit the Menu screen is displayed if the headset or device is correctly connected. DDDisconnecting - Icom IC-SAT100M | Operating Manual - Page 22
6 SPECIFICATIONS AND OPTIONS Installing the AH-40 The AH-40 can be connected instead of the antenna element attached to the RF unit. LLSee also Installing the antenna (p. 12) to connect the AH-40. NOTE: ••Move away from buildings and install the transceiver in areas with an open sky. ••When you - Icom IC-SAT100M | Operating Manual - Page 23
6 SPECIFICATIONS AND OPTIONS Installing the AH-40 6. Attach the antenna unit cover. Y Type Screw NOTE: When the AH-40 cable is inserted into the antenna cover, or the antenna unit cover is removed, the antenna unit does not meet IP67 requirements for waterproof protection. DDSpecification •• - Icom IC-SAT100M | Operating Manual - Page 24
7 TROUBLESHOOTING Troubleshooting PROBLEM POSSIBLE CAUSE No power comes ON ••Bad connection to the power supply. ••Fuse is blown. "Antenna Unit No ••The serial numbers of the antenna unit - Icom IC-SAT100M | Operating Manual - Page 25
How the World Communicates A7597-2EX-4 © 2020-2021 Icom Inc. Dec. 2021 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
 |
 |
OPERATING MANUAL
7 TROUBLESHOOTING
6
SPECIFICATIONS AND OPTIONS
5
CONNECTING AND MAINTENANCE
4 MENU SCREEN
3 OTHER FUNCTIONS
2 BASIC OPERATION
1 PANEL DESCRIPTIONS
INTRODUCTION
iSAT100M
SATELLITE PTT