Icom IC-SAT100M Operating Manual - Page 19

Specifications And Options

Get Icom IC-SAT100M PDF manuals and user guides View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

6 SPECIFICATIONS AND OPTIONS Specifications LLAll stated specifications are subject to change without notice or obligation. DDGeneral ••Frequency range: 1616 ~ 1626.5 MHz ••Number of channels: 240 Channels ••Type of emission: 41K7Q7W ••Duplexing method: TDD (Time Domain Duplex) ••Multiplexing method: TDMA/FDMA ••Antenna impedance: 50 Ω nominal ••Output impedance (audio): 4 Ω ••Operating temperature range: -30˚C ~ +60˚C, -22˚F ~ +140˚F ••Power supply voltage: 10.5 to 32 V DC nominal Negative ground ••Power Over Ethernet IEEE 802.3at standard: 25 W maximum for PD (Powered device), 30 W maximum for PSE (Power sourcing equipment) ••Current drain: Receive stand-by (Digital Mode): 550 mA Receive max.audio: 800 mA (Internal Speaker), 1.1 A (External Speaker) Transmit High (7W): Less than 2.5 A, Average 0.7A ••Dimensions*: Main unit: 125 (W) × 29 (H) × 156.5 (D) mm, (4.9 (W) × 1.1 (H) × 6.2 (D) inches) Command Microphone: 5 9.5 (W) × 134.6 (H) × 30.1 (D) mm (2.3 (W) × 5.3 (H) × 1.2 (D) inches) Antenna unit:  76.8 (W) × 200 (H) × 76.8 (D) mm, (3.0 (W) × 7.9 (H) × 3.0 (D) inches) ••Weight (approximate): Main unit: 0.95 kg, 2.1 lb Main unit + Microphone: 1.2 kg, 2.6 lb Antenna unit: 0.5 kg 1.1 lb DDTransmitter ••Output power: ••Modulation: ••Channel spacing: ••Frequency stability: ••Spurious emissions: ••Audio harmonic distortion: 7.0 W maximum DE-QPSK/DE-BPSK 41.667 kHz ±1.5 ppm 0.25 μW (1 GHz or less) 1.0 μW (More than 1 GHz) 0.8% typical (at AF 1 kHz) DDReceiver ••Sensitivity: ••Audio output power (At 5% distortion): * Projections not included. -115 dBm typical 1.5 W (Typical) into an 8 Ω load (Internal speaker) 4.0 W (Typical) into an 4 Ω load (External speaker) 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
16
6
SPECIFICATIONS AND OPTIONS
Specifications
L
All stated specifications are subject to change without notice or obligation.
D
General
• Frequency range:
1616 ~ 1626.5 MHz
• Number of channels:
240 Channels
• Type of emission:
41K7Q7W
• Duplexing method:
TDD (Time Domain Duplex)
• Multiplexing method:
TDMA/FDMA
• Antenna impedance:
50 Ω nominal
• Output impedance (audio):
4 Ω
• Operating temperature range:
–30˚C ~ +60˚C, –22˚F ~ +140˚F
• Power supply voltage:
10.5 to 32 V DC nominal
Negative ground
• Power Over Ethernet
IEEE 802.3at standard: 25 W maximum for PD (Powered device),
30 W maximum for PSE (Power sourcing equipment)
• Current drain:
Receive stand-by (Digital Mode): 550 mA
Receive max.audio:
800 mA (Internal Speaker), 1.1 A (External Speaker)
Transmit High (7W):
Less than 2.5 A, Average 0.7A
•
Dimensions*:
Main unit:
125 (W) × 29 (H) × 156.5 (D) mm,
(4.9 (W) × 1.1 (H) × 6.2 (D) inches)
Command Microphone:
59.5 (W) × 134.6 (H) × 30.1 (D) mm
(2.3 (W) × 5.3 (H) × 1.2 (D) inches)
Antenna unit:
76.8 (W) × 200 (H) × 76.8 (D) mm,
(3.0 (W) × 7.9 (H) × 3.0 (D) inches)
• Weight (approximate):
Main unit: 0.95 kg, 2.1 lb
Main unit + Microphone: 1.2 kg, 2.6 lb
Antenna unit: 0.5 kg 1.1 lb
D
Transmitter
• Output power:
7.0 W maximum
• Modulation:
DE-QPSK/DE-BPSK
• Channel spacing:
41.667 kHz
• Frequency stability:
±1.5 ppm
• Spurious emissions:
0.25 μW (1 GHz or less)
1.0 μW (More than 1 GHz)
• Audio harmonic distortion:
0.8% typical (at AF 1 kHz)
D
Receiver
• Sensitivity:
–115 dBm typical
• Audio output power
(At 5% distortion):
1.5 W (Typical) into an 8 Ω load (Internal speaker)
4.0 W (Typical) into an 4 Ω load (External speaker)
* Projections not included.