Icom IC-SAT100M Operating Manual - Page 12
Display, Information
View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4 MENU SCREEN Menu items DDDisplay Backlight Select a Backlight setting. ••OFF: The backlight is always OFF. ••ON: The backlight is always ON. ••Auto (Key): When any switch except [PTT] is pushed, the backlight lights for 5 seconds. ••Auto (Dim): The backlight automatically becomes dark when the D-sub 25 pin function is active. ••Dim: The backlight is darker than "ONˮ. Contrast Adjust the contrast level. Language Select a Language for the user interface. DDBeep Sets the transceiver's beep level. TIP: When you set the beep level to between "1 (Linked)" and "5 (Linked)," you can adjust the beep level within the range of 0 and selected level by rotating [VOL]. System Beep Lv Sets the system beep output level. The beep sounds when connecting to or blocked from the system. Emer Beep Lv Sets the beep output level when in the Emergency mode. Key Beep Lv Sets the key beep output level. Ringer Lv Sets the ringer output level. Opening Beep Lv Sets the opening beep output level. The transceiver beeps when it is turned ON. DDInformation Battery Info Displays the battery voltage. RSSI Displays the Received Signal Strength Indication (RSSI). My Position Displays your current position. Firmware Info Displays the transceiver's firmware information. Satellite Info Displays satellite information. Certification Displays the certifications acquired with the transceiver. 9